Dosing pumps MX

The MX series has a solenoid and a ball valve made of ceramics. Series MXE with a smaller solenoid and sticky valves FPM.

- PRICE/QUALITY. New design, high quality equipment with competitive price
- Wall installation and compact size
- The pump is equipped with fasteners for quick and easy installation
FPM pump head is equipped with ball valves Ceramic
KEY features of the MX series
Plastic case is reinforced PP, IP65 adjusting the frequency of the pulse 0-120 pulse/min Membrane Teflon Head with valve air bleed Standard accessories (KIT1 STD) Hose ø 4x6 mm, fence - PVC, reset - PE

Additional options
Pump with low noise + 20,00 €
Head with sticky valves: minus the sum of € 10.00 of the cost of the pump
Level sensor + 40,20 €
MX P/D supports the flow sensor + 10,00 €. Flow sensor - € 115,00
Performance 110Vac 60Hz. The price does not change
Performance 12-24Vd + 10 % to the cost of the pump (C/A, C/AL and MF to 5.5 l/h)

Pump type

Starting

indicators*

The frequency of the pulse

Impulse volume ml

The diameter of the hose

Head material

Valve type

O-ring

Fitting

l/h

bar

1.5

10

1,5 l/h

10 bar

120 pulse/min

0,21

4x6 mm

PP 3/8"

ball

FPM

PM

2,5

15

2.4 l/h

15 bar

120 pulse/min

0,34

4x6 mm

PP 3/8"

ball

FPM

PM

5.5

07

6 l/h

7 bar

120 pulse/min

0,77

4x6 mm

PP 3/8"

ball

FPM

PM

07

04

7 l/h

4 bar

120 pulse/min

0,98

4x6 mm

PP 3/8"

ball

FPM

PM

*Note
PVDF
For chemically aggressive agents. In addition to the price of the pump: the pump head, the nipple - PVDF, ball valve head - ceramic o-ring - PTFE (EPDM or Teflon), sticky valve suction filter, non-return double sticky injector - FPM, air intake hose, hose - PVDF
PMMA
For vasska liquids. In addition to the price of the pump: head PMMA (polymethylmethacrylate, plexiglass), ball valve - ceramic (Ø11), nipple 1/2""- œœ o-ring - FPM, the injection valve and the filter fence - PVC, the intake hose h PVC hose h - PE. Working pressure reduced by 50%
Auto
For automatic air bleed. Additional to the price of the pump: the pump head and the nipple - PVDF, ball valve - Ceramic o-ring - FPM. Working pressure is reduced by 50%

Initial indicators are stored under the condition of periodical operation of the pump (30 minutes running, 15 minutes rest)

MX C/A
Analog constant ON/OFF mode. Adjusting the frequency of the pulses 0†100%. The maximum frequency of 120 pulses/min Without support level sensor Two scales adjust performance: 0†20% and 0†100%.

MX C/AL
Analog constant ON/OFF mode. Adjusting the frequency of the pulses 0†100%. Supports the level sensor. Alarm indicator level sensor Under the order: Dual level control upper and lower level of the reagent.

MX C/D
Digital constant ON-OFF mode. Adjusting the frequency of the pulses 0†100%. Microprocessor-based digital control. Supports the level sensor. Model C/DL complete with level sensor (optional). Under the order: Dual level control upper and lower level the reagent.

MX P/D
Proportional operation by a signal (water meter):
division (n:1), multiplication (1xn) multiplication with memory 1xnM Microprocessor-based digital control. Adjusting the frequency of the pulse 0†100%. Measuring modes: constant ON-OFF and proportional. Supports the level sensor. Model P/DL, complete with level sensor (under the order). Under the order: Supports the flow sensor. The flow sensor to be ordered separately. The feature of the P/D+ sequence pulses, respectively.

MX CS/D
Proportional mode on mA signal. Measuring range: 4†20 mA and Vice versa Microprocessor-based digital control. Adjustment frequency pulse 0†100%. Measuring modes: constant ON-OFF and proportional Supports the level sensor. Model CS/DL complete with level sensor (optional).

MX MF
Multifunction metering pump, comprising the maximum number of features Microprocessor-based digital control. Adjusting the frequency of the pulse 0†100%. Proportional mode: impulse water meter (division n:1, umnojenie,
multiplication with memory 1xnM), the number of ppm on mA signal 4†20 mA and Vice versa Modes dosing: constant ON-OFF and proportional. Control: pulse/min; pulse/hour. Digital timer, weekly or daily programming. Supports the level sensor. Model MF/L complete with level sensor (under the order). Under the order: Supports flow sensor. The flow sensor to be ordered separately. RS232 output to PC. Under the order: Double level control of the upper and lower level of the reagent. Under the order: The sequence of pulse/injection flow sensor (optional).