The dosing pumps FXS

Plastic case is reinforced PP, IP65 Cylinder with valve air bleed Ball valve ceramic Membrane Teflon.

Mounting options pumps series FXS
- Fixing capacity
- Wall mount with support bracket

The MAIN characteristics of the series FXS
Reinforced plastic housing PP, IP65 Cylinder with valve air bleed Ball valve from ceramic Membrane Teflon. Series FXS - only adjusting the frequency of the pulse frequency control pulse 0-120 pulse/min Hose ø 4x6 mm, fence - PVC, vent - PE Standard accessories (KIT1 STD)

Additional options
Performance 110Vac 60Hz. The price does not change
Support for wall installation + 41,00 €
Head with sticky valves: minus the sum of € 10.00 of the cost of the pump
Pump with low noise + 20,00 €
FXS P/D+ supports flow sensor + € 10,00. The flow sensor - € 115,00
Level sensor + 40,20 €
Performance 12-24Vd + 10 % to the cost of the pump (C/A, C/AL and MF up to 5 l/h)

Specifications

Pump type

Starting

indicators

The frequency of the pulse

Impulse volume ml

The diameter of the hose

Head material

Valve type

o-ring

Fitting

l/h

bar

1,5 10 1,5 l/h 10 bar 120 pulse/min 0,21 4x6 mm PP 3/8" ball FPM PP of 2.5 15 2.5 l/h 15 bar 120 pulse/min 0,34 4x6 mm PP 3/8" ball FPM PP 03 20 3,6 l/h 20 bar 120 pulse/min 0,42 4x6 mm Pvbr 3/8" ball FPM PP 5,5 07 6 l/h 7 bar 120 pulse/min 0,77 4x6 mm PP 3/8" ball FPM PP 06 12 6,2 l/h 12 bar 120 pulse/min 0,84 4x6 mm PP 3/8" ball FPM PP 08 09 7.5 l/h 9 bar 120 pulse/min 1,10 4x6 mm PP 3/8" ball FPM PP 14 04 17,6 l/h 4 bar 120 pulse/min 1,96 4x6 mm PP 3/8" ball FPM PP 22 02 23 l/h 2 bar 120 pulse/min is 3.08 4x6 mm PP 3/8" ball FPM PP

*Note
PVDF
For chemically aggressive agents. In addition to the price of the pump: the pump head, the nipple - PVDF, ball valve head - ceramic o-ring - PTFE (EPDM or Teflon), sticky valve suction filter - FPM, irrevocable sticky double valve injection - FPM, air intake hose, hose - PVDF
PMMA
For vasska liquids. In addition to the price of the pump: head PMMA (polymethylmethacrylate, plexiglass), ball valve - ceramic (Ø11), nipple 1/2""- œœ o-ring - FPM, the injection valve and the filter fence - PVC, the intake hose h PVC hose h - PE. Working pressure reduced by 50%
Auto
For automatic air bleed. Additional to the price of the pump: the pump head and the nipple - PVDF, ball valve - ceramic o-ring - FPM. Working pressure is reduced by 50%

FXS C/A
Analog constant ON/OFF mode. Adjusting the frequency of the pulses 0†100%. Two scales of adjustment performance 0†20%, 0†100%. Without the support level sensor

FXS C/AL
Analog constant ON/OFF mode. Adjusting the frequency of the pulses 0†100%. Supports the level sensor. Alarm indicator the level sensor. Under the order: Double level

FXS C/D
Digital constant ON-OFF mode. Adjusting the frequency of the pulses 0†100%. Microprocessor-based digital control. Supports level sensor Under the order: Control of the upper and lower level of the reagent. Model C/DL complete with level sensor.

FXS P/D
Proportional operation by a signal (water meter):
division (n:1), multiplication (1xn) multiplication with memory 1xnM. Adjustment frequency pulse 0†100%. Microprocessor-based digital control. Modes dosing: constant ON-OFF and proportional Supports sensor level. Model P/DL, complete with level sensor (optional). Under order: Supports the flow sensor. The feature of the P/D+ the sequence of pulses per injection

FXS CS/D
Proportional mode on mA signal. Range dimensions: 4†20 mA and Vice versa Microprocessor-based digital control. Adjusting the frequency of the pulse 0†100%. Measuring modes: constant ON-OFF and proportional Supports the level sensor. Model CS/DL in complete with level sensor (optional).

FXS MF
Multifunction metering pump, comprising the maximum number of functions Proportional mode: pulse water meter (division n:1, umnojenie,
multiplication memory 1xnM) the number of ppm on mA signal 4†20 mA and Vice versa dosing regimens: constant ON-OFF and proportional. Control: pulse/min pulse/hour. Digital timer, weekly or daily programming. Adjustment frequency pulse 0†100%. Supports the level sensor. Model MF/L in complete with level sensor (on order). Under the order: Support sensor flow. The flow sensor must be ordered separately. RS232 output to PC. Under order: Double level. The sequence of pulse/injection sensor flow (under the order).