Dosing pumps FX
Price: | 3 870 UAH |
Company: | TPK TEHNOPROM |
Seller: | Scherbak Sergej Aleksandrovich |
Phones: | +380 (96) 889-77-77 Show phone |
Address: | Kyiv, Ukraine |
Series FX - adjust the length of piston stroke adjusting the frequency of the pulse 0-120 pulse/min Ball valve made of ceramics The Teflon Membrane
Dosing pumps FX
Mounting options pumps series FXS
- Fixing capacity
- Wall mount with support bracket
MAIN characteristics of the FX series
Plastic case is reinforced PP,
IP65 Cylinder with valve air bleed Ball valve from
ceramic Membrane Teflon Series FX - adjust the length of piston stroke
Adjusting the frequency of the pulse 0-120 pulse/min Hose ø 4x6 mm, fence - PVC,
reset - PE Standard accessories (KIT1 STD)
Additional options
Performance 110Vac 60Hz. The price does not change
Support for wall installation + 41,00 €
Head with sticky valves: minus the sum of € 10.00 of the cost of the pump
Pump with low noise + 20,00 €
FX P/D+ supports flow sensor + € 10,00. Price flow sensor + € 115,00
Level sensor + 40,20 €
Performance 12-24Vd + 10 % to the cost of the pump (C/A, C/AL and MF up to 5 l/h)
Pump type
Starting
indicators
The frequency of the pulse
Impulse volume ml
The diameter of the hose
Head material
Valve type
O-ring
Fitting
l/h
bar
1,5 10 1,5 l/h 10 bar 120 pulse/min 0,21 4x6 mm PP 3/8" ball FPM PP of 2.5 15 2.5 l/h 15 bar 120 pulse/min 0,34 4x6 mm PP 3/8" ball FPM PP 03 20 3,6 l/h 20 bar 120 pulse/min 0,42 4x6 mm Pvbr 3/8" ball FPM PP 5,5 07 06 l/h 07 bar 120 pulse/min 0,77 4x6 mm PP 3/8" ball FPM PP 06 12 6,2 l/h 12 bar 120 pulse/min 0,84 4x6 mm PP 3/8" ball FPM PP 08 09 7.5 l/h 09 bar 120 pulse/min 1,10 4x6 mm PP 3/8" ball FPM PP 14 04 17.6 litres/h 04 bar 120 pulse/min 1,96 4x6 mm PP 3/8" ball FPM PP 22 02 23 l/h bar 02 120 pulse/min is 3.08 4x6 mm PP 3/8" ball FPM PP*Note
PVDF
For chemically aggressive agents.
In addition to the price of the pump: the pump head, the nipple - PVDF, ball
valve head - ceramic o-ring - PTFE (EPDM or Teflon), sticky
valve suction filter - FPM, irrevocable sticky double valve
injection - FPM, air intake hose, hose - PVDF
PMMA
For vasska liquids. In addition to the price of the pump: head
PMMA, plexiglass), ball valve - ceramic (Ø11),
nipple 1/2""- œœ o-ring - FPM, the injection valve and the filter fence - PVC,
the intake hose h mm PVC hose Hm - PE. Working pressure
reduced by 50%
Auto
For automatic air bleed.
Additional to the price of the pump: the pump head and the nipple - PVDF, ball
valve - ceramic o-ring - FPM. Working pressure is reduced by 50%
FX C/A
Analog constant ON/OFF mode. Adjusting the frequency of the
pulses 0†100%. Two scales of adjustment performance 0†20%,
0†100%. Without the support level sensor
FX C/AL
Analog constant ON/OFF mode. Adjusting the frequency of the
pulses 0†100%. Supports the level sensor. Alarm indicator
the level sensor. Dual level (under the order).
FX C/D
Digital constant ON-OFF mode. Adjusting the frequency of the
pulses 0†100%. Supports the level sensor. Model C/DL complete with
level sensor (optional).
FX P/D
Proportional operation by a signal (water meter):
division (n:1), multiplication (1xn) multiplication with memory 1xnM. Adjustment
frequency pulse 0†100%. Microprocessor-based digital control Modes
dosing: ON-OFF and proportional. Supports the level sensor.
Model P/DL, complete with level sensor (optional). Feature
the P/D+ a sequence of pulses, respectively. Under the order: supports
the flow sensor.
FX CS/D
Proportional mode on mA signal range: 0...4 †20mA
or Vice versa. Measuring modes: constant ON-OFF and proportional
Supports the level sensor. Model CS/DL complete with level sensor
(under the order).
FX MF
Multifunction metering pump, comprising
the maximum number of features Microprocessor-based digital control.
Adjusting the frequency of the pulse 0†100% Proportional mode:
impulse water meter (division n:1, umnojenie, multiplication with memory
1xnM), the number of ppm on mA signal 4†20 mA and Vice versa. Modes
dosing: constant ON-OFF and proportional. Control: pulse/min;
pulse/hour. Digital timer, weekly or daily programming.
Dual level under the order. Supports the level sensor. Model MF/L in
complete with level sensor (optional). Under the order: the sequence
pulse/respectively, the flow sensor, dual level.