Metering diaphragm pumps VX

Microprocessor-based digital control. Adjusting the frequency of the pulse 0†100% Measuring modes: constant ON-OFF and proportional

Metering diaphragm pumps VX

KEY features of the VX series

Aluminium housing, IP65 protection

Ball valve ceramic is 30 ÷ 80 l/h

Sticky valve 5†20 l/h

The Teflon Membrane

Adjusting the frequency of the pulse

Support level sensor

Standard accessories the Pump is covered with anti-acid epoxy paint
 

Additional options
Performance 110Vac 60Hz. The price does not change
Adjustment of stroke length for VX + 95,00 €
Head with sticky valves: minus 10 € from the cost of the pump
Pump with low noise + 20,00 €
Level sensor + 40,20 €

Specifications

Pump type

The frequency of the pulse

Impulse volume ml

Lifting height

The diameter of the hose

Head material

Valve type

O-ring

Fitting

l/h

bar

05 20 160 pulse/min 0,52 2m 4x6 mm PVC Bur 3/8" sticky FPM PP 10 10 160 pulse/min 1,04 2m 4x6 mm PP 3/8" ball FPM PP 20 05 160 pulse/min 2,08 2m 4x6 mm PP 20L/h 3/8" ball FPM PP 30 04 180 pulse/min 2,08 1.5 m 10x14 mm PVC 1/2" ball FPM PP/PVC 50 03 180 pulse/min 4,60 1.5 m 10x14 mm PVC 1/2" ball FPM PP/PVC 80 01 180 pulse/min 7,40 1.5 m 10x14 mm PVC 1/2" ball FPM PP/PVC

*Note
PVDF
For chemically aggressive agents. In addition to the price of the pump: the pump head, the nipple - PVDF, ball valve head - ceramic o-ring - PTFE (EPDM or Teflon), sticky valve suction filter - FPM, irrevocable sticky double valve injection - FPM, air intake hose, hose - PVDF

PMMA
For vasska liquids. In addition to the price of the pump: head PMMA, plexiglass), ball valve - ceramic (Ø11), nipple 1/2""- œœ o-ring - FPM, the injection valve and the filter fence - PVC, the intake hose h PVC hose h - PE. Working pressure reduced by 50%

Auto
For automatic air bleed. Additional to the price of the pump: the pump head and the nipple -

PVDF, ball valve - Ceramic o-ring - FPM. Working pressure is reduced by 50%

 

VX C/A
Analog constant ON/OFF mode. Two adjustment dial performance 0†20%, 0†100%/ adjusting the frequency of the pulses 0†100%. Without the support level sensor

VX C/AL
Analog constant ON/OFF mode. Adjusting the frequency of the pulses 0†100%. Supports the level sensor. Alarm indicator level sensor Under the order: Dual level control upper and lower level of the reagent.

VX P/A to order: the sequence of pulses per injection sensor output
Proportional operation by a signal (water meter):
division (n:1), multiplication (1xn) multiplication with memory 1xnM Microprocessor-based digital control. Adjusting the frequency of the pulse 0†100%. Measuring modes: constant ON-OFF and proportional Supports the level sensor. Model P/AL complete with level sensor (under the order). Under the order: Supports the flow sensor. The flow sensor to be ordered separately. Under the order: the Sequence of pulses, respectively.

VX MF
Multifunction metering pump, comprising the maximum number of features Microprocessor-based digital control. Adjusting the frequency of the pulse 0†100%. Proportional mode: impulse water meter (division n:1, umnojenie,
multiplication with memory 1xnM), the number of ppm on mA signal 4†20 mA and Vice versa Modes dosing: constant ON-OFF and proportional. Control: pulse/min; pulse/hour. Digital timer, weekly or daily programming. Supports the level sensor. Model MF/L complete with level sensor (on order). Under the order: Supports flow sensor. The flow sensor to be ordered separately. Under the order: Dual level control upper and the lower level of the reagent. Under the order: the Sequence of pulse/injection