Install diamond drill HILTI DD 130
Offer type: salePublished: 28.02.2015
| Price: | negotiated |
| Seller: |  Vladimir |
| Phones: |  0672674850 Show phone |
| Address: | Ukraine, Kyiv Oblast', Brovary |
POSSIBLE SHARING!
HILTI DD-130
Power 1900 W
Wet and dry drilling diameter 8 - 162 mm
- Making holes in concrete, stone, brick and asphalt with high precision under the cables, pipes, ventilation systems, anchor
- Test drilling
Wet drilling in reinforced concrete hole Ø 12 mm to 62 mm - manual application
Wet drilling in reinforced concrete hole Ø 12 mm to 132 (152) mm - stanine application
Dry drilling in masonry, concrete and other light materials hole Ø 16 mm to 162 mm - manual / steninae application
Advantages:
-Can be used in manual mode or in stanina application
-Designed for dry and wet drilling
-Providing a comfortable working position of the operator during the drilling process
-Fast and easy drilling angle up to 45°, which does not require additional devices
-Quick clamping mechanism for attaching the motor block. Keyless Chuck for quick change drill bits
-Possibility of mounting the base plate by a vacuum method, using anchor equipment or Keyless columns
-Motor power 1900 W - high performance
-3 speed drilling provide optimum performance for each material and diameter
-Provide access for drilling in the corners close to the wall
-Bubble level for precise positioning
Power 1900 W
Number of speeds 3
1st rotation speed without load 780 rpm
2-I speed at no load 1400 rpm
3rd rotation speed without load 2600 rpm
The range of drilling in wet mode in manual 8 mm - 132 mm
The range of drilling in wet mode on the frame 12 mm - 152 mm
Dimensions (LxWxH) 515 x 114 x 170 mm
Rated voltage 230 V
Rated current of 8.7 And
Mains frequency 50-60 Hz
Weight in accordance with EPTA 01/2003 7.8 kg
System weight 21.1 kg
Chuck type BI+
Max. torque, 1st speed of 23.5 Nm
Max. torque, 2 speed 15.2 Nm
Max.torque at the 3rd speed 5.6 Nm
Comes in a high impact plastic case
