sell new salad line production Holland, cleared in Moscow

Machine for slicing vegetables and fruits, model G-3300 Universal cutting machine with conveyor belt, for enterprises of average power. It is a modern machine for cutting vegetables indicative of its ability to work with large volumes and high quality of the processed material, for example, production lines, industrial food, etc. Machine G-33000 is designed for cutting hard vegetables, boiled vegetables, leafy vegetables, such as raw potatoes, carrots, beets, peppers, cabbage, onions, radishes, radish, cucumber, tomato, leek, etc., to washers, rings, sticks, strips, cubes, flakes. The machine meets all hygiene requirements and all modern types of cutting all vegetables and fruits. Quality slice of any fruit and vegetables ensures long-term storage of cut products. The machine design provides guaranteed cut quality, safety in operation and minimum maintenance costs. The machine is made of stainless steel V2A. All machine parts that directly interact with the product, also made of stainless steel V2A. The principle steps: The vegetables are placed on a conveyor belt that brings them to the cutting knife. Chopped vegetables out of the bottom of the cutting chamber and fall into the tank or silo is transported further. Security: All covers and openings are provided with modern and maintenance of security systems. These systems provide control over the condition of the machine and therefore safe to use. Drive the knife has a special brake system, guaranteed to stop the machine when the cover zone of the cutting knife or the side cover of the machine. Specifications: • Capacity range from 200 to 800 kg per hour, depending on product type, shape and size of the cut, for example: Green onions 5mm: 200 kg/h, Salad 10mm: 500 kg/hour, Cabbage 2.3 mm: 700 kg/h, Beets, carrots 3mm: 800 kg/h. • Plannedeconomy drive belt speed (0,36 kW) • Two-speed drive rotation of the cutting knife (0,55 / 0,88 kW) • Width of the conveyor belt: 150 mm • The height of the passage: 120 mm • Upper and lower conveyor belts can be easily removed for washing and cleaning machine • Power: 1,24 kW • Machine length: 1576 mm • Width of machine: 800 mm • Machine height: 1216 mm • Machine weight: about 270 kg (without cutting tool) • Power of the machine: 400V, 3 phase • Power management: 24V Module 2. Machine for washing vegetables, fruits and salads, model GWT 2000/350 Washer continuous series GWT is well proven for washing salads, vegetables and fruits. Washing machines can be used for washing of whole fruits and wash cut products. The operation of the washing machine based on the principle of so-called "Archimedean screw system of water lift". With this system, the movement of water occurs in the form of screws in the opposite direction to the movement of the product, so the product is transported. If this product does not move rectilinearly and in a circular motion, resulting in a guaranteed optimal cleaning products. Thanks to a specially developed technology, the water pressure at the "Archimedean screw system of water lift" is chosen optimally processed product. Thus, guaranteed damage when handling delicate products, such as salad, with optimal washing results. The intensity, the washing time and the transport speed of the product is chosen optimally processed product. Model: GWT-2000/350 • The length of the washing bath 2000 mm, with a vibration device for carrying out products, filter and tank for water circulation • Washing system operates by the force of water pressure • The transport speed of the product and the speed of the water flow is regulated • Tank: 450 litres • Bath width: 350 mm • The length of the vibrating sieve: 1000 mm The machine is made of stainless steel V2A, 3 mm thick All machine parts that directly interact with the product, also made of stainless steel V2A. Machines are supplied in the following configuration: • Two circulation pump (15 m3/h 1.5 kW) stainless steel V2A. • Security system, which turns off the pumps if the water level in the bath is too low. • The machine on legs (supports), resetting the height. • Execution pipeline and fittings of stainless steel V2A • Drive vibrating sieve 3/300 • Control voltage 24 V Module 3. Centrifuge for drying sliced vegetables, fruits and salads, model - MSD-500 Centrifuges are used to remove surface moisture from salads and cut vegetables and fruit after washing. The compact design of the machine with cover with weight balance, made entirely of stainless steel V2A, window covers made of plexiglass. The machine is supplied in the following versions: • single-speed rotation of the drum 500