Mini 400 magnetic card reader with memory, portable magnetic stripe reader

Portable, miniature magnetic card reader, powered by a battery and having a function real-time clock.

It is designed to stand alone, without the participation of the PC.
Reads and remembers the 3 tracks magnetic card, written in the standard ISO7811.
In addition to content track reader remembers the date and time, when she had been reading.

Designed for rapid time and attendance, visitor registration (such as exhibitions) and other

Attention!

• Installed Li-Pol battery is a consumable item and is rated for 300 cycles of charging/discharging.
• Then perhaps the natural decline in the maximum time after a full charge. For maximum recovery time, require replacement batteries.
• Before you start to use the reader, you need the PC to install the utility to work with MSRmini400, and set the real time clock. Otherwise, the reader will constantly blink both LEDs. When the utility starts, it should be remembered that the speed of communication in the program the default is 19200. You need to set the same speed virtual COM port 19200 on the PC in the "device Manager".

Distinctive features:
512 KB of internal memory for data storage
Saving in memory up to 2048 maximum possible records with 3 tracks
Built-in real time clock (RTC)
Reader 3 track standard ISO7811
Auto power off
Led indicator status and operating modes
Display a full battery discharge
Display memory overflow

Specifications:
Read speed: 7.6 ~ 127 cm/sec
2 LEDs for display of status and mode of operation
Power source: rechargeable Li-Polymer 220mA (3.7 V)
Certificates: FCC/CE
Dimensions: (L) 82 x (W) 20 x (In) 28 mm
Operating temperature range: 0 ~ +55 degrees