The sawing line with milling and profiling technology sawing and rip. The manufacturing of wood chips

Performance: from 50 000 to 130 000 m3 of boards per year, for one shift
The diameter of the logs: minutes - 100 mm, Max. - 450mm
Length of logs: min - 2 m, max 6 m

Features of the production process:
Canter Group is a unique solution company Storti S. p.A. Horizontal and vertical milling sites, as well as profiling the node is connected in the same machine.
solution Canter Group allows you to "shorten" the sawing line, that is, to reduce the used space of the sawmill complex.
- when sawing logs combined milling and profiling machine Canter Group obtained the Central beam and process chips. When the customer can also obtain two or four side Board;
• the Central beam passes through the two-shaft machine with multiple horizontal shafts, the output is the final product - boards the required type;
• after multi-machine get on Board belt conveyor, operators manually stack the boards, sorted by quality, size and so on

The product yield
• maximum optimization of the process of sawing, the maximum useful output boards or lumber from each log. The production process lines Canter Group focuses on get the maximum number of boards or lumber from each log, and also get expensive product of wood chips.
• obtaining of wood chips. Technological chips is a valuable intermediate product, widely used in various household and industrial areas. The chips used for pellets, paper/pulp, cardboard, wood-based panels particleboard and fiberboard products chemical and hydrolytic production, etc. Chips is, in fact, a second business which will bring considerable profit to the owners sawmill complex. Especially in recent years, most customers from CIS countries prefer milling-major technology sawing, as in the region every day there are new complexes pellets production, paper and so on - for which process chips is the main raw material.

The line configuration
The entire production process is conducted at a sawmill lines, stocked exclusively from the company's equipment Storti, with very the low number of operators, which, incidentally, is not loaded physical work, and must simply monitor the correct operation of machines and lines in General.

Flexible solutions
• the level of process automation sawing line, depending on the customer requirements. More than 50 years of experience allows STORTI set fully automated sawmill facilities.
• to get ready for shipment piles without the participation of additional staff. Optionally, you can set automatic stackers, equipped cantoblanco, line sorting boards and other sawing machines.

The number of operators on the line: from 2 to 5