Sell pump CNS (g) 60-330 official dealer
Offer type: salePublished: 27.02.2015
| Price: | negotiated |
| Company: | OOO Firma Polimet |
| Seller: |  Sergej Alekseevich |
| Phones: |  0684205152 Show phone |
| Address: | Ukraine, Kharkivs'ka Oblast', Kharkiv |
Pump CNSG 60-330 Centrifugal multistage pump, horizontal type , this type of pumping equipment designed for pumping in a hospital chemically neutral liquids,industrial water and other non-explosive liquids similar to water in density, viscosity, chemical activity, and other parameters .
The pump 60 CNS 330, is used for pumping water containing solids in amounts of not more than 0.1% by volume and the particle size is not more than 0.2 mm, PH value from 7 to 8.5
Pumps CNC-330, CNSG-330 starting from January 2013 produced universal Central nervous system(G), at the same time, these pumps have the following characteristic differences in the temperature of the pumped liquid.
Pump CNS 60-330 pumping fluid with a temperature in the range from 0 to + 45 deg.With . Pump CNSG 60-330 pumping fluid with a temperature lying in the range of +45 degrees.C to +105 deg.Since, however, with regards to pumps CNS 330 production JSC POS" there is a possibility of pumping water with temperatures ranging from 0 to 105 deg.With the addition of cooling water in the front and back of the rack for cooling of the bearings. Pump CNS differs from the pump CNSG the first features self-priming. This condition is self-priming, is achieved due to the installation inside the pump is a special valve. Other parts and components pumps CNSG 60-330 and CNS 60-330 identical. In order to exclude from the operation of the valve, in the pump CNS 330 need to shut down the hole leading to the valve, they are on the rear pump bracket from the top . Shaft seals of pumps is a gland packing.
Pumps CNSG 60 330 are widely used for transportation of water in the systems of industrial hot water (hot water ) , industrial, administrative and residential buildings. Pumps CNS 60 330 used in the irrigation of fields), as well as in systems for cold water supply in industrial , residential buildings, systems of drainage from coal mines in the water supply systems in oil-bearing formations during oil production.
Pumps CNSG apply where there is no possibility to create pressure industrial console, or horizontal pumps of type D.
In the pumping unit CNSG-330 as a rule, the pump set motors industrial performance. Most often is used for these purposes applies three-phase asynchronous motor with short closed rotor 90 kW. But there are cases, on request, to the Pump CNS 60 330 is installed diesel dvigateli usually YAMZ, KAMAZ.
The pumping unit CNSG 60 330 is a construction consisting of a pump and motor mounted on the frame, a plate made of a channel bar,and connected through a flexible coupling. Torque from the motor to the pump it is passed through the elastic clutch MUIT.
Pump CNSN 60-330, CNSM 60-330 designed for pumping oils, and other petroleum products viscosity from 15 to 215 CST at a temperature of from +2 to +60 deg.With
Depending on the oil temperature inlet pressure to the pump is in the range of 0.7 to 0.15 kgf/see kV), these pumps are designed for pumping of flooded gas and crude oil in the systems of gathering in the oil industry, are used for the preparation and transportation of oil.
The principle of operation of the pump CNS 60-330 based on the interaction of the blades of the impeller and the fluid. Rotating, the impeller of the pump tells the circular motion of the liquid between the blades. Due to centrifugal force, the liquid from the center of the wheel moves to the external output and the newly released space is filled with liquid, supplied from the suction pipe under atmospheric or positive pressure.
The pump 60 CNS 330, is used for pumping water containing solids in amounts of not more than 0.1% by volume and the particle size is not more than 0.2 mm, PH value from 7 to 8.5
Pumps CNC-330, CNSG-330 starting from January 2013 produced universal Central nervous system(G), at the same time, these pumps have the following characteristic differences in the temperature of the pumped liquid.
Pump CNS 60-330 pumping fluid with a temperature in the range from 0 to + 45 deg.With . Pump CNSG 60-330 pumping fluid with a temperature lying in the range of +45 degrees.C to +105 deg.Since, however, with regards to pumps CNS 330 production JSC POS" there is a possibility of pumping water with temperatures ranging from 0 to 105 deg.With the addition of cooling water in the front and back of the rack for cooling of the bearings. Pump CNS differs from the pump CNSG the first features self-priming. This condition is self-priming, is achieved due to the installation inside the pump is a special valve. Other parts and components pumps CNSG 60-330 and CNS 60-330 identical. In order to exclude from the operation of the valve, in the pump CNS 330 need to shut down the hole leading to the valve, they are on the rear pump bracket from the top . Shaft seals of pumps is a gland packing.
Pumps CNSG 60 330 are widely used for transportation of water in the systems of industrial hot water (hot water ) , industrial, administrative and residential buildings. Pumps CNS 60 330 used in the irrigation of fields), as well as in systems for cold water supply in industrial , residential buildings, systems of drainage from coal mines in the water supply systems in oil-bearing formations during oil production.
Pumps CNSG apply where there is no possibility to create pressure industrial console, or horizontal pumps of type D.
In the pumping unit CNSG-330 as a rule, the pump set motors industrial performance. Most often is used for these purposes applies three-phase asynchronous motor with short closed rotor 90 kW. But there are cases, on request, to the Pump CNS 60 330 is installed diesel dvigateli usually YAMZ, KAMAZ.
The pumping unit CNSG 60 330 is a construction consisting of a pump and motor mounted on the frame, a plate made of a channel bar,and connected through a flexible coupling. Torque from the motor to the pump it is passed through the elastic clutch MUIT.
Pump CNSN 60-330, CNSM 60-330 designed for pumping oils, and other petroleum products viscosity from 15 to 215 CST at a temperature of from +2 to +60 deg.With
Depending on the oil temperature inlet pressure to the pump is in the range of 0.7 to 0.15 kgf/see kV), these pumps are designed for pumping of flooded gas and crude oil in the systems of gathering in the oil industry, are used for the preparation and transportation of oil.
The principle of operation of the pump CNS 60-330 based on the interaction of the blades of the impeller and the fluid. Rotating, the impeller of the pump tells the circular motion of the liquid between the blades. Due to centrifugal force, the liquid from the center of the wheel moves to the external output and the newly released space is filled with liquid, supplied from the suction pipe under atmospheric or positive pressure.
