Sell pump CNSG 60-165 official dealer
Offer type: salePublished: 27.02.2015
| Price: | negotiated |
| Company: | OOO Firma Polimet |
| Seller: |  Sergej Alekseevich |
| Phones: |  +380684205152 Show phone |
| Address: | Ukraine, Kharkivs'ka Oblast', Kharkiv |
Flow, m3/h:
60
Head, m:
165
Frequency, Rev/min:
3000
Power, kW:
55
The unit weight kg:
829
Pump weight kg:
282
The dimensions of the unit, mm:
1930×522×731
The dimensions of the pump, mm:
1110×520×500
Pump CNSG 60-165 - required for pumping neutral cold and hot water up to 105°C with a minimum content of abrasive impurities (maximum of 0.21% by weight and size of solid particles not more than 0.22 mm), thus the supply of water to the pump must be pressurized more than 10 meters century Art.
The housing section pump CNS(g) form separate sections (chambers), the number of which is less than the number of impellers per unit, as the first wheel is located in the front cover of the pump. The pump head will be equal to the sum of pressures created by the impellers. However, a single impeller series CNSG gives the pressure of 22m. water.article The impellers are placed in one housing and are mounted on the same shaft.
A constructive solution pump allows you to increase or decrease the pressure, keeping the nominal flow.
These pumps are widely used for pumping water in coal mines directly in water supply systems, and hydraulic systems to create and maintain pressure.
Conditional obanacare:
CNSG 60-165:
Canterberry pump sectional hot water
submission - 60 m3/h;
head - 165 feet
Can be equipped with e/d ex.
Pumps manufactured by Russia and Belarus.
60
Head, m:
165
Frequency, Rev/min:
3000
Power, kW:
55
The unit weight kg:
829
Pump weight kg:
282
The dimensions of the unit, mm:
1930×522×731
The dimensions of the pump, mm:
1110×520×500
Pump CNSG 60-165 - required for pumping neutral cold and hot water up to 105°C with a minimum content of abrasive impurities (maximum of 0.21% by weight and size of solid particles not more than 0.22 mm), thus the supply of water to the pump must be pressurized more than 10 meters century Art.
The housing section pump CNS(g) form separate sections (chambers), the number of which is less than the number of impellers per unit, as the first wheel is located in the front cover of the pump. The pump head will be equal to the sum of pressures created by the impellers. However, a single impeller series CNSG gives the pressure of 22m. water.article The impellers are placed in one housing and are mounted on the same shaft.
A constructive solution pump allows you to increase or decrease the pressure, keeping the nominal flow.
These pumps are widely used for pumping water in coal mines directly in water supply systems, and hydraulic systems to create and maintain pressure.
Conditional obanacare:
CNSG 60-165:
Canterberry pump sectional hot water
submission - 60 m3/h;
head - 165 feet
Can be equipped with e/d ex.
Pumps manufactured by Russia and Belarus.
Delivery in Kharkov, Odessa, Lugansk, Lutsk, Donetsk,
Rivne, Poltava, Kyiv, Vinnytsia, Dnipropetrovsk, Zhytomyr, Zaporizhia,
Ivano-Frankivsk, Kirovograd, Lviv, Nikolaev, Simferopol, Sumy, Ternopil,
Uzhgorod, Kherson, Khmelnytsky, Cherkasy, Chernihiv, Chernivtsi, Crimea,
Dnipropetrovsk, Chernihiv, Lviv, Uzhgorod, Lutsk
