Machine for the production of pasta Farfalle butterfly bows 350 kg/h b/

Machine for production of pasta Farfalle butterfly bows 350 kg/h b/

The machine is used for production macaroni specialized formats such as "butterfly" ("Farfalle pasta") from finished tape a sheet of dough of a width of 600 mm
Main features:

calibration unit rollers with a diameter of 150 mm, is designed for sheet test of a width of 600 mm to ensure a uniform thickness across the width of the output test; specified device can be configured to receive output sheet the necessary thickness from very thin to relatively thick, type "home";

block the formation of flexible clamps (top and bottom) with two upper and two the lower rods to a good defense (along the length) dies during operation. The system is flexible and its maximum load can be calibrated on stage of manufacturing, so it also protects punching folding machine from possible overloads caused, for example, improper adjustment form;

-balanced camshafts and levers connected to the frame to prevent vibration even at high speeds;

block cutting waste (residues dough cutting wheels, synchronized with stamp to ensure proper reception of the tape test while cutting subsequent automatic shipment of waste for re-processing;

block forced lubrication (with oil filter) equipped with a pump, covering all moving parts to ensure long life of the machine. Display system control of the machine when the oil pressure drop;

two inverter to control two motors (in gauge and threaded block);

three Autonomous regulator speed: one speed calibration, one for power and one for slicing simultaneous and proportional shift, two speed;

-programmable logistics controller for processing data production, programming display of all machine functions and control in various environments. In this the section also stores information about the proportional relationship between the speed (rolling and cutting) under different operating conditions. Available 30 settings with all parameters;

display and keyboard for input and storage of operating parameters in accordance with the setting and display the possible alarms with specific descriptions;

-set and/or automatic recalculation in accordance with the digital setting:

- speed rolling;

- speed slicing;

- current performance in kg/h;

- performance in kg/h in the dryer.

service software included with the PLC of the machine and serves to alert the operator in continuous mode about the necessity of maintenance of the machine (the tightness of the chains, lubrication of chains and bearings, oil change blocks the main camshafts, oil change, gearbox and so on). Decontamination this emergency visualization is possible only through a password.

Read more - request to office@ar-tech.com.ua

Pasta equipment, manufacture of macaroni, do pasta, equipment for the manufacture of macaroni, equipment for the production pasta, pasta in bulk, machine for pasta, equipment for pasta shop, equipment for macaroni production equipment for fresh pasta,

Machine for production Farfalle pasta, Farfalle machine, machine for Babcock machine for pasta butterflies,