Bizator  /  Adverts  /  equipment and materials  /  agricultural equipment, spares

The Mecmar grain drier mobile FSN 15/138 T

Offer type: salePublished: 28.02.2015
Price:negotiated
Company:Agrarnaya Industrial'naya Kompaniya OOO
Seller:Krolyak Gennadij Vladimirovich
Phones:
Show phone
Write a message
Address:Ukraine, Chernihivs'ka Oblast', Chernihiv

Mobile grain dryers periodic actions are designed for drying all kinds of grains and legumes. Bottom loading and top discharge. The Central screw with variable pitch for uniform load on the drive mechanisms; protection of grain against ignition using system petals in the combustion chamber; the basic elements (drying chamber, the outer cylinder is made of stainless steel; the elements of the bearing structure is made of anodized galvanized steel. Mesh diameter of cells of 2.5, 1.5 and 1 mm

The proposed model Mecmar FSN 15/138 T is used for drying small grain crops. Extra equipment - aspiration system, a roof for protection from rain, electric, gas burner.

One cycle corresponds to the 4 phase process: loading, drying, cooling, unloading.

Data / Model

Mecmar FSN 15/138 T

The capacity of the drying chamber ( m3 )

20

The capacity of the drying chamber ( t )

15

The diameter of the working cylinder, m

2,65

The height of the cylinder in the transport position, m

4,5

The height of the cylinder in the working position, m

5,6

Dumping height, m

4,4

Weight, tons

3,35

Riello burner, liquid fuel

DT/PT

Motor power (kW)

36

Performance from 25% to 14 %, t/h

3,9

Performance from 25% to 14 %, vol/day (corn)

93,6

The time of loading / unloading, min

9/9

Drying time from 25% to 14%, min

132

The cooling time, min

60

Fuel consumption l/t/%

Dt 1,0

The drive from PTO

+

Fuel tank capacity, l

550

The required power from the tractor PTO, HP

50-70

The drive from the mains

+

Additional options:

Perforated mesh Ø 1.5 mm

+

Perforated mesh Ø 1mm

+

The drive from the mains

+

Roof to protect from rain

+

The aspiration system (from light impurities)

+

Enlarger chute of 2.5-3.5 m3

+

The heat exchanger

+