The 110 kV cables with XLPE insulation

LLC "Project Engineering" offers to put in Your address Copper the wire cross section of 400 mm2, Copper and multilayer shell diameter 150 mm*, which is water-resistant cable according to his section.

Special absorptive material in the area of the screen for multi-layered membrane consisting of aluminum strip and the outer shell, polyethylene, water-resistant cable along its length.

Polyethylene outer shell has mechanical characteristics (shore hardness 58). Semi-conducting layers and the insulating layer were three extruded and crosslinked.

Tests made in accordance with the requirements of IEC 60840, revision 1999

Cable type: N2XS(FL)2Y 1 h RM/150 64/110 kV

Analogues: - Cable Pitu EIT h 64/110 kV Pith, Pituh

Design a single-wire cable 110 kV isolation from The PPA in accordance with tolerances IEC:

The cross-section of copper wire - 400 MMG

the inner conductive layer, approx. - 1, mm

the XLPE insulation, thickness approx. - 1, mm

the outer conductive layer, approx.- 0.9 mm

low conductivity krepirovannaya paper - 1-2 layer

copper screen wires with the contact spiral and non-woven foam, approx. - 150 mm2

multilayer shell: aluminium bar with plastic coating and the outer shell of the polyethylene

the nominal thickness of the outer shell, approx.- 6.0 mm

external cable diameter approx. - 75 mm

the minimum radius of a bend on the road, approx. - 2.2 m

the smallest bend radius for cable tip, approx. 1.5 m

cable weight net approx. - 7,8 t/K

delivery length/drum, about - 700 m

the number of reels - 18

Year - 2004 ,

Price - 3400 rubles/m including VAT.