Semiautomatic welding
Offer type: salePublished: 11.05.2015
| Price: | 110 000 UAH |
| Company: | DNEPR METIZ TRADING |
| Seller: |  Svyatoslv Orlov |
| Phones: |  380966035701 Show phone |
| Address: | Ukraine, Dnipropetrovska Oblast', Dnipropetrovsk |
Welding machine pneumatic operation (HACT 1000)
The machine is designed for welding masonry wire mesh (prepared by bars) with lyrics. characteristics:
The minimum diameter of welded fittings - 2 mm
The maximum diameter of welded fittings - 5 mm
The maximum width of welded mesh - 1000 mm
The maximum length of welded mesh has no restrictions
Step transverse (stepless adjustment) - 50 - 200 mm
The longitudinal step (stepless adjustment) - 50 - 200 mm
Three-phase mains supply - 380 V, 50Hz
Maximum power consumption – 70-150 kW
Current – 40-140 And (depending on the base diameter of the wire and number of electrodes used)
The welding time is about 0.3 - 0.4 sec
Drive type - pneumatic
Type of load transverse rod - manual
Type of load of the longitudinal rod - manual
Type of control pulling carriage - automatic
Type of control hammering and welding machine
Switching type welding simultaneously in a series or cascade
Working air pressure - 0,4 -0,9 MPa
Cooling – possible water or air by installing additional Kolarov when using transformers TCE-75
Staff: 1 person, the operator
Performance: not less than 700 square meters per shift (depends on map size)
The machine is equipped with:
Transformer welding TCE-75 - 2pc
The electrodes in the quantity - 16 (bottom) and 16 (top)
The electronic control unit of busp 5-1pc production AmurElektro with security systems 2 CL.
System sewn pneumatic equipment.
Basic machine 110000 USD. If desired, the machine may vary depending on needs, the price is set.
You have the option of making cashless payment.
There is the possibility of an extended supply of a complete line for production of welded wire mesh which includes:
WELDING MACHINE (1PC), RIGHT CUTTING (1PC), A MACHINE FOR CUTTING (1PC).
