Valve PEAK
Offer type: salePublished: 13.05.2015
| Price: | 1 900 UAH |
| Company: | OOO 'Spetsavtomatika Ukraina' |
| Seller: |  Miroshnikova Alisa Vadimovna |
| Phones: |  0503434050 Show phone |
| Address: | Ukraine, Kharkivs'ka Oblast', Kharkiv |
This device is designed for installation in compressors that operate without lubrication of the cylinders. This device is a closing body which interrupts or starts the gas passage performed by the compressor.
Valve PEAK is not suitable for use in compressors that work on gas compression, adding some mechanical impurities and drip the liquid. Also this unit does not apply to refrigeration compressors and oxygen type, and on those devices that compress air after alkaline cleaning.
Install valve PIC is versatile, as it depends on the algorithm of the considered device. The valve can be both suction and discharge.
Due to the fact that the device has a very important function, there is a special set of rules that tells you exactly how to exploit it. If used improperly, the valve can happen inevitable accident, the consequences of which may be unrecoverable.
If You decide to upgrade your compressor, You should know that valve PEAK must be installed with an auxiliary landing rings.
This unit carries out its work by means of special plates, with which it is equipped. These plates are mounted parallel to the gas flow, so that he could easily get into the saddle.
When the gas passes through the valve, it presses the plate to the lift stop and starts or to enter the cylinder, or Vice versa – to get out of it. It depends on the specifics of the valve. If it is absorbing, then the gas will be supplied, but if the discharge, the cylinder will be cleared.
