The MBS technical plates 2-40 mm
Offer type: salePublished: 20.05.2015
| Company: | OOO Silver |
| Seller: |  OOO Silver |
| Phones: |  (0362)46-09-26 Show phone 69-04-68 Show phone |
| Address: | Ukraine, Rivnens'ka Oblast', Rivne |
The MBS technical plates 2-40 mm
The MBS technical plates, as TMCs, represents a seal, which is used for fixing the fixed joints, reducing friction between surfaces, as well as a reliable cushioning material to compensate for shock loads.
The main distinguishing feature of MBS that technical plates in this category remain resistant to mineral and synthetic oils.
The MBS technical plates are made of nitrile butadiene rubber. Therefore, even after contact with petroleum products, the material loses its original elasticity and flexibility.
Plate MBS have the following physical characteristics
Material name
The technical plates MBS
Working environment
Air spaces, containers, vessels, inert gases at a pressure of from 0.5 to 4 ATM or oils, emulsions, fuel oil based diesel at a pressure of from 0.5 to 10 ATM, nitrogen
Limit prochnosti MPa%
Rastagenia
Operating temperature -40 to 80 °C
Hardness Shore A 65±5
The main distinguishing feature of MBS that technical plates in this category remain resistant to mineral and synthetic oils.
The MBS technical plates are made of nitrile butadiene rubber. Therefore, even after contact with petroleum products, the material loses its original elasticity and flexibility.
Plate MBS have the following physical characteristics
Material name
The technical plates MBS
Working environment
Air spaces, containers, vessels, inert gases at a pressure of from 0.5 to 4 ATM or oils, emulsions, fuel oil based diesel at a pressure of from 0.5 to 10 ATM, nitrogen
Limit prochnosti MPa%
Rastagenia
Operating temperature -40 to 80 °C
Hardness Shore A 65±5
