Solid fuel boiler Proterm model beaver 20 DLO, 18,0/19,0 kW

Brand:VAILLANT GROUPГруппа TMC:chip boiler:davanala power min./max., kW:themperature coolant max., °C:aboone pressure max., bar:Automatica:getdiameter of duct, mm:abi (Height/Width/Depth), mm:935/440/640

• Cast-iron heating boiler with solid fuel

• Cast iron heat exchanger

• Easy installation and service

• Large combustion chamber

• High efficiency, thanks to the two-way horizontal exit of products of combustion

• Low heat loss to the surrounding environment

• The natural venting installation possibilities

• Heating boiler for solid fuel mode of operation with the temperature change of the boiler

• Use as fuel wood (maximum moisture content 20%) and coal (grain size not less than 40 mm)

• Used for heating residential and industrial premises with heating with natural or forced circulation

• The ability to combine with gas or electric boiler for heating and DHW

• Use for burning wood of a length of 320 mm and a diameter up to 180 mm

• Built-in thermometer on the front panel

• Adjust thrust through the chimney damper

• Thermo-mechanical output regulator is to regulate the supply of primary air depending on the temperature change of water in the boiler

• The placement of the power control in the upper part to protect against possible ingress of hot air from the combustion chamber

• The presence of a damper to change the intensity of combustion and power

• Resistance to corrosion and thermal shock, due to uniform distribution of temperature in the individual sections of the heat exchanger

• Spacious combustion chamber does not require special preparation (grinding) of fuel.