Solid fuel boiler BRS-16 BMT

Steel solid fuel domestic boiler BRS-16 BMT fire-tube type, with a capacity of 16 kW with manual loading solid fuel, the boiler is designed for hot water heating systems with forced or natural circulation of coolant heating rooms measuring up to 160 sq. m.. as fuel for the boiler is peat, wood, coal, coke, fuel granules (pellets), wood briquettes. You caniGATE to waste wood and agricultural production (sawdust, wood chips, sunflower husks).

Two door solid fuel boiler long burning BRS-16 BMT consists of fire-tube heat exchanger, a control unit, a boiler, flue, combustion chamber, fan, the bottom part of the combustion chamber have a cast iron grate and a ash pan designed to remove ash and other combustion products. Control of boiler is an automatic program zPID controlling the operation of the boiler: at the exit of the flue gas, Central heating pump, fans, boost, hysteresis heating, venting and pyrolysis combustion thus saving on the fuel expenses up to 15%.

Boiler heat exchanger made of plate boiler steel grade B20, thickness 4:8 mm. the Boiler has a large combustion chamber (length/height/width: 328/450/450 mm) that allows you to burn logs up to 45 cm In the upper part of the fire-tube heat exchanger over the combustion chamber is located a block from vertical seamless pipes with a diameter of 76. Installed in pipes, the turbulence, spiral plates which slow down the flow of pyrolysis gases, improve the rate of heat transfer and make the heating boiler is uniform. In the process of burning solid fuel fire-tube heat exchanger with turbulators reduces consumption, and as a consequence polluting emissions in the atmosphere increases efficiency of 85%. Solid fuel boiler BRS-16 BMT insulated foil insulation Nobasil (Austria) reduces the heat loss of the heat exchanger of the boiler. The heat exchanger of the boiler is lined with steel panels of the polymer coating.

     Solid fuel boiler BRS-16 BMT by way of fuel combustion is equipped with:

Basic package with natural draught , the combustion process is controlled with the traction control, the temperature control of the coolant occurs by means of the opening of the air flap closing, without additional air supply;

With fan and remote control - in contrast to boilers with natural draught the boiler is equipped with a fan which also blows air into the combustion chamber, and the control unit (controller temperature).

Main advantages of boilers BRS BMT:

- Fire-tube heat exchanger provides 2 times more heat exchange surface, compared to shelf and high efficiency more than 85%;

- seamless seamless boiler pipe ensures a long service life (20 years);

- working pressure of 3 kgf/cm2 (0.3 MPa) (Test pressure 4.5 kgf/cm2 (0,45 MPa); Used in systems open and closed type;

- foil insulation Nobasil (Austria), ensures effective conservation of energy heat boiler body and protects against external factors;

- boiler plate steel grade B20, thickness 4:8 mm;

for efficient combustion the baffle installed. The boiler is capable of self-purification;

- large door for loading fuel 25х45 cm (use firewood with a length of 45 cm), respectively, an enlarged combustion chamber - boiler prolonged burning;

- cast iron grate (lifetime unlimited) - there is a possibility of loading of wood chips, coal, pellets, peat and other fine fuels.

Tot he control over the management of the boiler carries out the program zPID controlling the operation of the boiler:

-at the exit of flue gases;-Central heating pump;

-pump hot-water supply;-the fan pressurization;

-hysteresis heating;

-purge, and the pyrolysis combustion;

-the lack of the human factor (in addition to fuel loading) to control the operation of the boiler (without staff).

The package of solid fuel boiler BRS-16 BMT :

1. Solid fuel boiler BRS-16 BMT;

2. Passport of the boiler;

3. Kochegary tool.