Device for setting the knives in the knife drums CMT 792 Italy
Price: | 65 EUR |
Company: | OOO 'Kami-7' |
Seller: | Mariya |
Phones: | 067 618 44 08 Show phone |
Address: | Ukraine, Zaporiz'ka Oblast', Zaporizhia |
Even the best knives will work perfectly as long as installed correctly and aligned. This operation can be quickly and efficiently performed using the adaptation of SMT 792.
Integrated magnets simultaneously held by the installer on the cutter body and blade for perfectly precise adjustment.
Set of magnetic fixtures are designed for precise placing of the knives in the cutter drums used on the four-way machines, and for setting the knives in the knife shafts on the planer and thicknessing machines.
Installation of the magnetic ceramic element
Magnetic soles
Precision stopper
This set consists of two installers and templates with a thickness of 0.8, 1 and 1.2 mm.
Advantages
- suitable for the cutter shaft of any diameter;
- the setting of the knives without removing the shaft;
- easy setup;
- accurate setting of knife
Placing knives in the cutter drum
1. The installation of the necessary departure of the knife relative to the surface of the drum is made with a set of probes on the ground, and then on the second magnetic device.
2. Two magnetic fixture are installed as shown in the figure at the edges of the knife drum. The knife, being in a weakened state, "sticks" to the magnetic base of the stem and then fixed (clamped) to the drum.
3. Placing knives on a first bottom drum of the quadripartite machine or on the knife shaft of the planing machine.
Comes in a wooden pencil case.
3 installation option