Blecher circular saw blades friction for dry cutting steel pipes and profiles CRV
Offer type: salePublished: 20.05.2017
| Price: | 95 EUR |
| Company: | OOO 'Kami-7' |
| Seller: |  Mariya |
| Phones: |  067 618 44 08 Show phone |
| Address: | Ukraine, Zaporiz'ka Oblast', Zaporizhia |
Purpose: cutting of workpieces made of carbon steel;
Processed materials: window reinforcement steel;
Alternative application: cutting of tubes, profiles and steel alloys;
The material of the teeth: the German steel according to DIN 1.2235 (80CrV2) 46-48 HRC;
Case material: German steel according to DIN 1.2235 (80CrV2) 46-48 HRC;
The shape of the tooth: the tooth with the angle of attack of 0º and curved backrest for workpieces with a wall thickness up to 4 mm;
Compatibility: used on the standard "flying" machines (Dreistern, Mannesmann, Oto Mills, MTM, Schloemann-Siemag, Siemens VAI, Danieli-Morgardshammar, TRM Koch-HK, SMS-Meer, Trennjaeger, Wean United and other)
Recommendations: the use of cutting fluid after the cutting zone, the peripheral speed of 110-250 m/s, the feed speed of 1000-2000 m2/s (more here);
Contraindications: procurement t 100ºC; lubricants and coolants to, or in place of the cut
Manufacturer: August Blecher AG (Germany)
Service: sharpening the tool
The principle of operation of friction saws Blecher is fundamentally different from the operation of the standard cutoff saws. The alternative name of the tool: "having friction", a good demonstration of the difference. Friction saws run at high speed and literally visitvisit the area of the cut. The teeth of these discs have specific shape and purpose and act as "scrapers", removing podplavlenie from rubbing the metal. On the one hand, this process of cutting much faster than the standard cutting, on the other – the speed suffers clean cuts – cutting the edges come out a bit melted.
Blecher friction saws are made with the expectation of a constant thermal stress experienced by the tool during operation. Therefore, most of the procedures in its manufacture is aimed at neutralizing the negative effects of friction and high temperatures. So, after quenching, the steel disc is subjected to a release process, which aims at improving the plasticity of the saw
350*2,5*40 -114 Euro
400*3,0*40 - 95 Euro
500*3,0*40 - 133 Euro
500*4,0*40 - 141 Euro
520*3,0*40 - 148 Euro
520*4,0*40 - 166 Euro
Processed materials: window reinforcement steel;
Alternative application: cutting of tubes, profiles and steel alloys;
The material of the teeth: the German steel according to DIN 1.2235 (80CrV2) 46-48 HRC;
Case material: German steel according to DIN 1.2235 (80CrV2) 46-48 HRC;
The shape of the tooth: the tooth with the angle of attack of 0º and curved backrest for workpieces with a wall thickness up to 4 mm;
Compatibility: used on the standard "flying" machines (Dreistern, Mannesmann, Oto Mills, MTM, Schloemann-Siemag, Siemens VAI, Danieli-Morgardshammar, TRM Koch-HK, SMS-Meer, Trennjaeger, Wean United and other)
Recommendations: the use of cutting fluid after the cutting zone, the peripheral speed of 110-250 m/s, the feed speed of 1000-2000 m2/s (more here);
Contraindications: procurement t 100ºC; lubricants and coolants to, or in place of the cut
Manufacturer: August Blecher AG (Germany)
Service: sharpening the tool
The principle of operation of friction saws Blecher is fundamentally different from the operation of the standard cutoff saws. The alternative name of the tool: "having friction", a good demonstration of the difference. Friction saws run at high speed and literally visitvisit the area of the cut. The teeth of these discs have specific shape and purpose and act as "scrapers", removing podplavlenie from rubbing the metal. On the one hand, this process of cutting much faster than the standard cutting, on the other – the speed suffers clean cuts – cutting the edges come out a bit melted.
Blecher friction saws are made with the expectation of a constant thermal stress experienced by the tool during operation. Therefore, most of the procedures in its manufacture is aimed at neutralizing the negative effects of friction and high temperatures. So, after quenching, the steel disc is subjected to a release process, which aims at improving the plasticity of the saw
350*2,5*40 -114 Euro
400*3,0*40 - 95 Euro
500*3,0*40 - 133 Euro
500*4,0*40 - 141 Euro
520*3,0*40 - 148 Euro
520*4,0*40 - 166 Euro
