Submersible dual mode precision router CMT7E

Vertical manual mill SMT 7E are used for cutting grooves, rebating, profiling, curved cuts, engraving, etc.
    
High power router (2.4 kW) easy to process MDF, chipboard, hardwood, artificial stone, slabs of great thickness, and to perform operations deep profiling details.
   
The main advantage of a router CMT 7E before competitors - equipment built-in lifter, for precise height adjustment of the milling, including remotely through the hole in the crank.
    
Easy access to the brushes on the electric motor allows you to quickly and easily replace the worn brushes on the new one.

Precise adjustment of penetration of the tool with three-position lock with setting the depth on a scale.
 
Switching from immersion to move on toothed rail is carried out by pressing buttons.

Features:
When attaching the router on the table in the "upside down" disassembly of the spring to reduce the load on the lifter.
Changing the cutter is above the table with just one wrench.
Automatic spindle lock and the lock switch to the change mode of the bit.
Adjustment knob vertical position for quick setup and precise handle adjustment to adjust the depth of milling.
A quick switch to the traditional mode of adjustment.Removable spring vertical travel for easy lifting and adjustment.
Effective dust extraction.
Protective cover on the main switch of a router prevents from accidental switching on the mill.
The special side ventilation slots on the housing, the mill reduces dust in the engine cover, this is especially important when the router mounted on a router table upside down.
The adjustable speed motor in the range of 8.000 – 20.000 rpm and soft start of the drive.
Dip the cutter occurs without skew along two cylindrical rails. One guide with toothed notches and lock.
Transparent plastic protective cover from the chips with the possibility of connection of a vacuum cleaner.
Handle for smooth and precise height adjustment of the cutter on a milling table.

Equipment router CMT7E
Base plate
Adjustable stop
Arm for smooth adjustment
Collet Ø8 and Ø12 (the ability to use collets from 6mm to 12.7 mm)
Wrench
Manual

Specifications:
Power 2400 W
The speed 8000-20000 rpm
Move dip 0-68 mm
The diameter of the collet in the kit, Ø8 and 12 mm
Weight 6 kg