Than glue the engine block? How to fix a crack in the engine block? How to fix a crack in metal without welding?

Than glue the block cylinders? How to fix a crack in the engine block? How to fix a crack in metal without welding? How to seal small cracks in the metal the hull? There is a solution!!!! All this is possible with the help of professional materials holodnogo curing of epoxy resins Chester Molecular. These the materials are very durable and easy to use, mechanically processed in any Metalworking tool contain large amounts of metal particles, and most importantly is very durable and durable. This two-component materials according to the type of "cold welding", only professional that have been developed over the years and has worked on dozens chemists, physicists and engineers have conducted hundreds of tests in laboratoy research institutes and so on...

How to repair or patch the crack in the cylinder block of the engine You ask - it's very simple, here is a simple example:

1. Possibly carve a crack across long to a depth of 2mm to 7mm and a width of 5-6mm (depending on thickness wall metal of the block and the geometry itself of the treated surface... the optimal depth of 4-5mm);

2. Clean from all impurities the surface of the cracks and around all the way around approximately 30-40mm;

3. Select material required Chester Molecular depending on the material of the cylinder block. If it's aluminum block, you must use the Chester Molecular Super AL, and if it is cast iron block, you must use the Chester Molecular SL Super or Super (this is due to the coefficient of thermal expanded metal, Chester Molecular Super AL contains the filler particles of aluminium and Chester Molecular Super SL, for example, particles of iron, etc., accordingly, we select a material which when heated will have the coefficient of thermal expansion as close as possible to the material of the underlay, that is, the block itself).

4. Prepare the necessary amount of material Chester Molecular for the treatment of cracks by observing the proportions of the components according to the sheet description of TDS and put it on the prepared surface cracks. In other words, shpatlyuem it thoroughly rubbing the material on the surface of the repair area. If necessary armorum fiberglass or other material.

5. After the final polymerization Chester Molecular (about 24 hours) using abrasive tool to remove imperfections and give the surface a regular geometric shape and need to paint it.

That's it - your unit is ready to operate, as you can see nothing complex, this can be done simply in your garage.