Mandrel boring with boring blocks 6300-4020

Boring bar D=40-63mm ,straight shank

6300-4020-02 Bar D63..boring with 100mm min. KM5, L=240 mm, type VE (Foot)

6300-4020-07 Mandrel D100..boring 180mm with XT. КМ6, L=200 mm, type VE (Foot)

2192-4007-01 Boring unit odnorazovyj D40..63 mm Type 2 (for through holes)

2192-4009 Boring unit dvortzovy D63..82 mm Type 1 (for blind holes)

2192-4006 Boring unit finish boring D42..63 mm type 1 (for blind holes)

2192-4012 Boring unit finish boring D100..180 mm Type 2 (for through holes)

2192-4020 Boring the block under the insert micrometer D=42-63 mm

Boring head with micrometer adjustment of the cutting edge

GDT.50.65.160 boring Head with MICR. adjustment D45..65 L=286, XT. 7/24 C50 for ГОСТ2587-93 исп3

GDT.40.65.160 boring Head with MICR. adjustment D45..65 L=253, min. 7/24 on К45 ГОСТ2587-93 исп3

GDT.50.65.350 boring Head with MICR. adjustment D75..95 L=477, with min. 7/24 C50 for ГОСТ258-93 исп3

Boring head for roughing and semi-finishing boring of holes GOST 25827-83

Olovka boring for roughing and semi-finishing boring of blind holes (Taper 50) GOST 25827-83

Boring head for roughing and semi-finishing boring through holes (Taper 50) ГОСТ25827-93

GDT.1.50.70.250 Head boring Dmin=55 and Dmax=70, L=250mm, black and semifinished bore blind holes ISO

GDT.1.50.70.250 Head boring Dmin=55 and Dmax=70, L=250mm, black and semifinished bore blind holes ISO

GDT.1.50.140.160 Head boring Dmin=110, Dmax=140, L=160mm, clerestory blind holes ГОСТ25827-93

GDT.2.50.90.160 Head boring Dmin=70, Dmax=90, L=160mm, bore through holes ГОСТ25827-93

GDT.2.50.90.315 Head boring Dmin=70, Dmax=90, L=315mm, for through holes ГОСТ25827-93 ИСО50

CARTRIDGE BORING Cartridge boring 6300-4018-08 F8..45 mm shank 7/24 K40 according to DIN 69871-ГОСТ25827-93

Cutter boring 2142-4022-08

Inserts carbide for boring bars 6300-4019-06 art. 2142-0418 l-20