Gear hobbing machine 5К310
Offer type: salePublished: 03.05.2019
| Price: | negotiated |
| Seller: |  Aleksandr |
| Phones: |  (099) 533-12-63 Show phone |
| Address: | Ukraine, Zaporiz'ka Oblast' |
5К310 Machine vertical gear hobbing machine. Worker. In good condition. There is a set of gears.
Designed for cutting (milling) of cylindrical spur, helical and worm wheels in single and mass production. The gear cutting is performed according to the method of break-in (diffraction) hob and the workpiece or passing the counter methods of milling. The machine works in a closed semi-automatic cycle and cycle setup.
The main parameters of the machine 5К310
The largest module of the cut wheels, mm 4
The largest diameter of a cut cylindrical spur wheel (0°) C-pillar (controllerkey), mm 200
The greatest angle of cut subjet of gears to be treated, degree ±60
Table
Table diameter, mm 200
The distance between the axes of the table and the cutter, mm 45..180
The distance from the plane of the table to the axis of the cutter mm 145 365..
Rapid traverse of table, mm/min 130
Manual table movement in one division of the limb, mm 0,1
Moving the focusing spot of the table by one division of the limb, mm 0,02
Caliper
The most moving of milling support, mm 220
Rapid traverse of cross slide, mm/min 280
The largest diameter of the cutting tool (hob), mm 125
The greatest length of the cutting tool (hob), mm 125
The diameters of the milling arbors, mm
The accelerated movement of the spindle along the axis, mm/min no
Turn the caliper on one scale division line, deg 1°
Turn the caliper on one scale division Vernier, min 10`
Conical hole of spindle Morse 4
Maximum axial shift of the cutter, mm 50
The highest value of the vertical movement of the caliper at an angle of inclination 0° mm 220
The highest value of the vertical movement of the caliper at an angle of inclination of 30°, mm 170
The highest value of the vertical movement of the caliper at an angle of inclination of 45°, mm 150
The highest value of the vertical movement of the caliper at an angle of inclination of 60°, mm 30..105
The mechanics of the machine
The limits of revolutions of the milling cutter, rpm 63..400
The number of stages of revolutions of the cutter 9
The limits of longitudinal (vertical) feed, mm/R 0,63..4
The radial feeds, mm/Rev ..2 0,315
The limits of tangential feeds, mm/Rev
The number of stages in the longitudinal (vertical) innings 9
The number of stages of radial feed 9
Propulsion and electrical equipment of the machine
The number of motors on the machine 5
The main drive motor, kW 4
Motor for rapid traverse, kW 2
The electric motor drive stepper motion, kW 0,27
The electric motor driving the hydraulic pump kW 1,1
Motor of cooling pump kW 0,12
Total power of electric motors, kW of 7.49
Dimensions and weight of machine
Overall dimensions of machine (length x width x height), mm 2000 x 1300 x 2040
Weight of machine with electrics and cooling, kg 4350
