Optimum TU 2304 Vario lathe metal lathe-cutting optimum Tu 2304 Vario tokarnia verstat
Offer type: salePublished: 16.05.2019
| Price: | 1 849 UAH |
| Company: | Stanok.org - internet-magazin stankov |
| Seller: |  stanok.org stanok |
| Phones: |  +380981500024 Show phone |
| Address: | Ukraine, L'vivs'ka Oblast', Lviv |
Price and availability check on the website the Machine org, or by phone
Description Optimum TU 2304 Vario:
Table lathe for metal OPTIturn TU2304 with variable speed, providing smooth adjustment of rotation of the spindle.
Change the speed of rotation of the spindle, inside the first transfer (i.e. 150-1100 rpm./min.) is smooth stepless.
Change the speed of rotation of the spindle, inside the second transmission (i.e., from 300-2200 rpm./min.) is smooth stepless.
Switching from one gear to the other is accomplished by manual throwing of belts, and previously removing the protective cover.
The switching speed of feed of the caliper occurs by manually changing gear, previously removing the protective cover.
Precision turning is ensured thanks to a high quality hardened and precisely ground spindle which provides a stable radial runout of less than 0,009 mm. Spindle lathe is mounted on a durable, accurate bearings (precision R5). Accurate the Chuck mounted on the lathe, prevents radial runout of more than 0.05 mm
Not the last role in ensuring precision in turning is a precision guides. Modern technology allows to temper the entire frame, this is not necessary. Much more important to accurately perform the necessary processes for the hardening of rails of a lathe bed of metal, and then produce accurate grinding. Guides bed lathe manufactured to the required Standards, will allow for many years to achieve stable accuracy when working on the machine. Guides OPTIturn TU2304 have passed quality hardened and grinding. The hardness of the metal of the guides corresponds to HRC 42 — 52.
Lead screw has a trapezoidal thread. Spindle planted in a double sintered bearing.
One of the functions of the lathe TU 2304 — automatic longitudinal feed and cutting metric and inch threads, for this supplied with the machine is a set of replacement gear.
Cross and top slide caliper has the price of division of the limbs of 0.04/0.01 mm., and the price of division of the limb of tailstock quill — 0,02 mm.
For turning long cones tailstock has the possibility of displacement of ±5 mm.
Clamp the tailstock quill on a lathe is performed by an eccentric lever.
On a lathe for metal set brushed DC motor with electronic control the number of revolutions of the spindle. Digital readout of the rpm of the spindle is displayed on the display located on the control panel. Commutator DC motor provides constant high torque.
To comply with safety requirements, the housing of the Chuck is made with a limit switch and control panel, lathe for metal, conveniently located emergency stop button.
OPTIturn TU2304 Vario was originally designed with the possibility of hooking in the CNC system.
Specifications Optimum TU 2304 Vario:
Motor 750 W 220 V ~50 Hz
Max. workpiece length 450 mm
Max. dia. processing over cross slide 115 mm
Max. dia. treatment over bed 230 mm
Width of bed 135 mm
Range of spindle speeds 150 — 2200 min-1
Number of speeds 2 steps, infinitely variable within each
Spindle taper MK 3
Through spindle hole of Ø 21 mm
The stroke of upper carriage 75 mm
Move the transverse carriage 120 mm
Cone tailstock MK 2
Tailstock quill travel 70 mm
Metric threads 0,4 — 3,5 mm/Rev
Thread inch 44 — 10 threads/inch
the height of the tool holder cutter (max) 14 x 14 mm
Dimensions l x W x h 965 x 585 x 510 mm
Weight 104 kg
Supplied Optimum TU 2304 Vario:
3-jaw lathe Chuck Ø 100 mm
Resistant centers MK 2/3
Guard
Chip tray
4-POS. tool holder
A set of replacement gears
Service tool
The user manual
On all equipment warranty 1 year, provide services for warranty and post-warranty service.
