Triethanolamine tea

www.chem.com.ua

e-mail: sales@chem.com.ua

Tel :+38 044-228-08-72

Tel: +38 098-882-15-15

 

Triethanolamine Tea

 

Triethanolamine part of softeners for rubber, fluids, perfumes. Salt triethanolamine and higher fatty acids are used as detergents, emulsifiers, wetting agents and lubricants. Technical triethanolamine used also as absorbent of acid gases, corrosion inhibitor, auxiliary material in cement production and as a raw material in several organic syntheses.

Without any restrictions it the substance is mixed with the aqueous media. The proportion dissolved in H2O: 149 g per 100 ml. with regard to solubility in other materials, ethyl alcohol, benzene and methyltryptamine, the dimethylketone and oil it high, in the limiting hydrocarbons, ethers is low. Combined with acids, this compound forms salts, which are organic Soaps.

Molar mass – 149,19 g/mol, the density of 1.124 g/cm3 (20 °C). Thermomoist: t melting point – 22 °C, t boiling point 335 °C, flash t – 179 °C. Formula: C6H15NO3.

Teas commercially available in two popular brands: A and B (there is a third In, but it ain't going to talk, because of the low demand). The main difference is in the quantity structure the main component and the additive (for different fractional composition). So, in the marches And the mass fraction of tea – at least 90 %. The remaining 10% divided between the DEA (9 %), MEA (1 %) and water (0.5 %). If to speak about mark B, the main the matter takes it to 85 %, the other (DEA, MEA and water) are 13 %, 2% and 1 %, respectively.

With regard to the technical directions, triethanolamine, due to their remarkable properties, can be used as:

– absorbent of acid gases;

– additive inhibiting corrosion symptoms;

– a bunch of synthetic and natural parts in the manufacture of cement;

accelerator/retarder curing concrete;

– component rubber softeners;

– a pH regulator, a constituent part lubricants, coolants fluids and all those washes;

– source in the synthesis of triethanolaminato and mustard gas;

– the complexing agent in the chemical. metallization;

– hardener/plasticizer polymers, epoxy resin compound and compositions for impregnation;

lubricant when creating products rubber, in particular of gloves;

party sealing parts electronic equipment;

– the reagent in the creation of the Amateur photo.

 

www.chem.com.ua

e-mail: sales@chem.com.ua

 

Tel :+38 044-228-08-72

Tel: +38 098-882-15-15

Tel: +38 093-880-15-15

Tel: +38 063-876-88-97

Tel: +38 066-306-10-50

 

Skype: chem.com.ua

http://chem.uaprom.net