sell spline-machine 5350

5350А Machine horizontal semiautomatic spline -. Purpose and scope

The machine is designed for milling on shafts and direct prambody involute splines and gear teeth made along with shaft.

Spline milling and gear teeth is hobbing slotted cutter according to the method of orbital, similar to the cutting teeth on hobbing machines.

Specifications spline-machine 5350А The name of the parameter 5350 The main parameters of the machine Accuracy class of the machine according to GOST 8-82 and GOST 659-78 N Max. module of cut, mm 6 The centre height, mm 250 Maximum diameter of cut, mm 150 The largest diameter of the workpiece installed over bed, mm 500 The shortest distance between the axes of the product and the cutter, mm 40..140 Distance between centers, mm 750, 1000, 1500, 2000 Maximum length of cut, mm 675, 925, 1425, 1925 The number of splines to be cut (subji), mm 4..36 The maximum diameter of mills, mm 140 Number of speeds of the spindle 6 Limits of speeds of the spindle 80..250 The number of feeds, rpm 12 Limits innings, rpm 0,63..5 The diameter of the spindle hole of the workpiece, mm 106 The cone under the center spindle of the workpiece, mm Morse 4 Cone center in the tailstock quill, mm Morse 5 The diameter of the milling mandrel, mm 27, 32, 40 Rapid traverse of the carriage, m/min 1,92 Milling the caliper The greatest movement of the milling caliper by hand, mm 100 The greatest movement of the milling caliper from the hydraulics, mm 30 The movement of the milling caliper on one division of the limb, mm 0,01 Propulsion and electrical equipment of the machine The number of electric motors installed on the machine 4 The motor of main drive, kW 6,5 Motor for rapid travels, kW 3,0 The electric motor driving the hydraulic pump kW 1,5 The electric motor cooling pump, kW 0,15 Total power of electric motors, kW 11,15 Dimensions and weight of machine Overall dimensions of machine (length x width x height), mm 2595 x 1550 x 1650 Weight of machine with electrics and cooling, kg 3800