Equipment for the production of charcoal.

Company VSK-Carbon is a developer and manufacturer of equipment for the production of charcoal, namely, charcoal pyrolysis kilns brand up-IVF (UP - EKO). Our pyrolysis furnace stamps (up-eco) UP-EKO — environmentally friendly smokeless, three contour heating of the retort, the selection, condensation and after-burning all the pyrolysis gases. Many manufacturers of charcoal use our equipment for firing of fuel briquettes Pini-key, turning it into charcoal is the new generation of coal long burning, high quality so-called " Charcoal briquettes Pini Kay for grilling, barbecue, grill, Josper tandoor etc."
The uniqueness of the facility lies in the fact that it works in closed cycle air emissions of pyrolysis gases with their incineration through the system post-combustion and after-burning of their own pyrolysis products in the furnace. This gives you the opportunity to save on the wood is suitable for heating small tools up to 50%. We have developed and implemented a system for the selection gas on our pyrolysis furnaces and gives highly quality charcoal by pyrolysis of wood and fuel briquettes Pini Kay. In any type of coal pyrolysis residues do not remain. The output of the whole annealed bar Pini Kay is 99.9% of any raw material. Installation — furnaces are manufactured with different volume download raw materials and different configurations of 5, 10, 25 m3 circular shape and 18 m3 rectangular. The output of the product of charcoal is: on wood -30-35%; fuel briquettes Pini Kay 35% -42% accordingly, over the cycle, depending on the type, quality and quantity downloadable raw materials. A full cycle is 2 to 3 days in depending on the volume of the firewood and 20 — 24 hours fuel briquettes Pini Kay. Wood consumption for heating up to 1-2 m3 per cycle in the wood and Of 0.1 — 0.2 m3 for briquettes. Service personnel 1 - 2 persons. When the operation does not require electricity. Mobile when moving . In our ovens are at the customer's request, it is possible to build not expensive device for the selection of coolant, hot air, hot water.&nbsp

For example, to obtain 1 ton of charcoal on the stove the brand up-ECO 10, it is necessary to use a 6.3 m3 of firewood. Of these, 5.5 m3 and this is about oak is 3.96 tone wood is pereopisanie and 0.8 m3 of wood is in the furnace. The output of coal amounts to 30%. The pyrolysis process will take approximately up to 2 days plus hours of cooling. Through two-three days we get 1250 kg of high quality charcoal-type restaurant.

For example, to obtain 1 ton of charcoal briquettes Pini Kay on furnace brand up-eco 10, it is necessary to use a 2.5 ton of fuel briquettes Pini Kay. And use 0.1 m3 of common firewood of the lowest quality. The entire production process takes 20 hours plus hours to cool down. And oven pack-EKO 25 for the same time and using 0.2 m3 of wood as fuel, coal produces Pini Kay 2.2 tons.