Press screw with Durostorum drive FB, 1974.in.

Press screw with Durostorum drive FB(160T.C.), 1974.in.
Specifications:
Nominal force,kN 1600
The stroke of the slide, 360 mm
Drive power, kW 10
Weight - kg,manufacturer - Chimkent
Dimensions (mm) HH.
The press is designed to perform a variety of stamping, landing, exhaust, bending, straightening, stamping and calibration.
The press consists of the following main components: the frame, degustatorov drive, forks, brakes, electrical equipment, lubrication systems and management. The bed.closed, detachable, consists of a table with the legs and the top steel beam connected by a coupling pins. The press drive . from degustatorov motor, the rotor of which serves as a flywheel connected with the lead screw. Two arc stator fixed on the top plate of the bed. The slider . cast steel is moved in a controlled directing bed.
Rotational movement of the rotor-flywheel and screw converted nut in reciprocating motion of the slide. The reversal of the stroke of the RAM is carried out by switching the phase windings of the arc of the stators. Brake flywheel . drum brakes, with pneumatic control. The inner surface of the shoes lined with friction tape. In the table posted by a mechanical ejector.
On upright frame mounted shock absorbers to soften the blow of the RAM on the top yoke in its course upwards. Special emphasis serves to hold the slide in its upper position for a long stop press.
Control presses . push button and pedal.
The wiring diagram includes the presses in adjustment and automatic modes, as well as in the mode of single moves.
Lubrication system . centralized.