Prepress system for production of films for printing

5.1 imagesetter Heidelberg Quazar Recorder system punching, 1998, century, vol. No. 983311423. Designed for films making system pin punch to reduce the complexity at the stage of manufacture of printed forms. Automation of process control download control blowout and unloading of the film is provided by a special LCD control panel, and a display process of the display means of the hardware-software DELTA. Technical indicators: a) a light source -- the laser diode; b) approach -- on the inner surface of the drum through the rotating prism; C) format of exposure - 535 x 505 mm; g) resolution - 5 degrees to 3387 dpi; d) the frequency-up to 80L/cm ( 200 Lpi); e) misalignment -- +/- 5 microns. on 8 consecutive films. 5.2 imagesetter is complete with hardware modules: DELTA TOWER, DELTA Workstation, DELTA TECH SOFTWARE. The device DELTA TOWER is a hardware implementation of a corporate rasterization algorithm developed Heidelberg, operates in fully automatic mode. Works with the data stream DELTA Workstation for hardware rasterization and send in a photo machine. DELTA Workstation runs and work management software system DELTA TECH SOFTWARE, created supporting them in a special file structure, which allows us to generate customized to reflect the technological parameters of the printing system of queues and to optimize the process of the imagesetter. Price: negotiable. 6. Machine for processing film. Multiline 550, 1998, century, vol. No. 9222-1779 Designed for processing positive and negative roll film in the cassette, and a sheet of photographic film. Equipped with an automatic provisioning with led indication ready, automatic water supply and drainage, manifesting and fixing solutions, as well as filter developing solution. Includes: the processing module; module fixing; module leaching; - Modul drying. The film processing is performed in a fully automatic mode. Specifications: Temperature control of the developer and fixer - 20-500C; The regulation step - 1 ; Drying temperature - 20-700C; Step regulation 5 ; Programmable modes of the developer - 4 ; The maximum width of the processed film - 550 mm 7. Copy frame Variocop FP , 1998, century, vol. No. 323601 Designed for the display of the image ( negative, positive) on an offset printing form by irradiation with ultraviolet light. Specifications: Max. the image size is 600 x 730 mm; Dimensions - HH mm. 8. Machine for processing plate Interplater 66, 1998, century, vol. No. 90095-0239 Designed for fast processing of offset printing plates ( positives, negatives). You can perform the following operations: developing printing plates; - hydrophilization; - the washing of printed forms; a protective layer; - drying of printed forms. Max. the format of the plate - 660 x 1000 mm Prepress complex since 1998 in Ukraine. All equipment was bought new. Operated since 1998.in "some" hands. Service - Heidelberg. Condition - good .