Bizator  /  Adverts  /  equipment and materials  /  industrial equipment  /  valves

The regulating valve dvuhetajny flange NJ,NJ

Offer type: salePublished: 27.02.2015
Company:PPF'Tehmashservyis'
Seller:Aleksandr Tkachuk
Phones:
Show phone
Show phone
Write a message
Address:Ukraine, Rivnens'ka Oblast', Rivne

The regulating valve dvuhetajny flange with membrane actuating mechanism (MIM)

NJ,NJ DN 25, 40, 50, 80, 100, 150, 200, 250, 300mm РN1,6 MPa

Designed for use in control systems of technological processes in chemical and other industries with the aim of continuous control of flow, pressure and other parameters of the working environment.

The valve can be equipped with:

• pneumoperitoneum PP-1, electropneumatically EPP-1, EPP-1 Ex,

• Filter regulator air pressure FSD or reducer RDF

• limit switches end positions

• upper manual handwheel.

DIGNITY

• Application, as gland packings, graphite rings allows to increase service life of packing several times in comparison with the seal of asbestos

• Valves are available with linear and equal-percentage capacity characteristic

Material of main parts:

Naimenovaniu, krishnachura midrange betali Tatarstan Ala nabicarabus

Specifications:

The nominal diameter, DN, Mama bandwidth, Кvу, m3/CH3,24,06,381012,51610162540162540634063100160 Allowable water leakage in the gate during Resp = 0.4 MPa., dm3/min, not bolee,0530,060,10,130,160,210,260,160,260,40,660,260,40,661,00.661.01.62.6 the nominal Pressure PN, MPa (kgf/cm2)1,6 (16)the Differential pressure is not more than, MPa (kgf/cm2)1,5 (15)Conventional pressure control air, MPa (kgf/cm2)0,25 (2,5)ambient Temperature, ?Hundreds of minus 30 to themperature working environment ?Hundreds of minus 15 to are working Credinta, steam, air and other liquid and gaseous media, neutral materials parts in contact with reduplicatively the sizes and dimensions of the sealing surfaces cabusao GOST 12815-80 on PN 1.6 use 1, number mass (kg)23414970