BALTECH recommends new CSI 2140 for unique solutions for diagnostics.
| Seller: |  Roman Romanov |
| Phones: |  (044) 392-29-15 Show phone |
| Address: | Kyiv, Ukraine |
Reducing the time for data collection for each unit of machinery
Opportunity analyzer CSI 2140 for four-channel data collection can not only significantly reduce the working time of the personnel performing these procedures, but also to reach more devices in the enterprise. According to the concept of Reliability technologies(Technology reliability), developed by BALTECH need more frequent vibrometer. BALTECH recommends new CSI 2140 for unique solutions for diagnostics.
Using a triaxial accelerometer with built-in magnet, it is possible to measure simultaneously the horizontal, vertical and axial vibration by installing the sensor on the bearing of the machine once. For comparison with the conventional method of data collection, the sensor you want to install on each bearing in three places. In addition, the data collection function PeakVue allows to determine the wear of the bearings. The speed of data collection new the device is 30% higher than the CSI 2130, and even more, in comparison with other analyzers vibration. This approach allows to reduce the total time of data collection for one unit of equipment more than 50%.
Service personnel to examine a larger number of machines, or to devote themselves to doing more important tasks such as diagnosis and analysis. For vibration monitoring auxiliary equipment we recommend the use of simple and inexpensive vibrometers BALTECH VP-3410.
http://www.baltech.com.ua baltech.ua@gmail.com, t/f: (044) 392-29-15
