BALTECH - vibration analyzer CSI 2140 (PeakVue and four triaxial vibration sensor)!

For the first time! BALTECH - vibration analyzer CSI 2140 (PeakVue and four the vibration sensor triaxial)! More efficient monitoring of bearings the slip.

To build orbits required dimensions in two mutually perpendicular axes for each bearing the slip. When working with two-channel analyzer this means get only one orbit at a time. Four-channel analyzer CSI 2140 allows you to simultaneously collect data from two bearings that allows more accurate and efficient to identify problems. With the analyzer CSI 2140 vibrometer compressors, turbines, and other high-speed machines, you quickly determine the problem of increased oscillation mechanism.

The analyzer CSI 2140 simplifies the process of design and analysis of orbits. It allows you to view two orbits on different clutch or two orbits with the movement of the axes of both bearings slide the shaft of the turbine, fan and other production equipment. The device allows to determine the movement of the center shaft in the bearing and to identify such problems as touching, oil whirl or whip.

The input analyzer adapter CSI 2140 allows you to perform channel measurements at startup turbine units. From these data it is possible to build orbits, allowing to determine any mechanical state, for example, self-oscillations, which can lead to damage to the equipment. Four concurrent measurement sensor allow to build two orbits (graphics trajectories in polar coordinates), identifying problems such bearings, as oil whirl or oil whip. This information allows you to identify problems and equipment to address questions about the safety of running the turbine.

The observation of two orbits or movement of the Central line shaft, two bearings of the turbine, fan, or other critical machines allows for the safe running of equipment.