Will produce and ship from a warehouse knives for pulp and paper mills and printers

We offer all sizes and all types of knives for cutting paper, cardboard, napkins: the Exact price is determined by the parameters of the knife, number of blades in one purchase. Wholesalers - special rates. We invite dealers.
Knives slitting flat
The slitting knives (for cutting paper) are used in the manufacture paper printing industry as the top of the cutting tool paper-cutting equipment, and more specifically, on slitting machine.
Also slitting knives are used when cutting rolls of hygienic paper, in the manufacture of toilet or kitchen paper, paper the towels.
Precision machine paper cutting is determined by the quality paper cutting knives. The cutting tool should do clean and accurate cutting.
In our production are the most popular sizes knives of different shapes and configurations with different angle sharpening:
Length: 350 -2000 mm;
Width: 60-160 mm;
Thickness: 8-14 mm
when cutting newsprint the average resistance between the instruments the re is 16 hours. Material of tools: HP, HNWS, CHF, KFM, HS
If you use a non-standard size knives for paper cutting, which in our catalog, including high-strength), the proposed produce them in our production. For this purpose it is necessary to provide drawing, sketch or sample products.

The disk knives for paper cutting
Knives disk required for cutting a single large roll of toilet paper on small. Salfetochnyj (disk) knives are used on slitting machines for making paper. Sharpening angle knife is 12° and 16°. The steel hardness of 50. 62 Material... tool: HP
Possible variants knife sharpener:
• Sharpening on one side (unilateral sharpening);
• sharpening on both sides (double-sided grinding);
• without sharpening, in the form of a disk with straight sharp edges.
Manufactured in compliance with TU-1-1245-75 double-layer and single-layer
In our production are the most popular sizes knives of different shapes and configurations with different angle sharpening:
Length: 500 - 610 mm;
Width: 50-82,5 mm;
Thickness: 4 - 5mm
Knives, slitter-rewinders
Designed for cutting paper slitting machines machines in paper manufacturing and printing industries.
Manufactured in compliance with TU-1-1247-75 steel HF
In our production are the most popular sizes of knives:
Length: 60 - 130 mm;
Width: 35 - 90 mm;
Thickness: 3 - 10mm
If you use a non-standard size knives for paper cutting, which in our catalog, including high-strength), the proposed produce them in our production. For this purpose it is necessary to provide drawing, sketch or sample products.
The knife blade is designed for cleaning the shafts of the cylinders and paper Board-making machines in the pulp and paper industry.
The average resistance: - on the shafts of granite up to 200 hours; - on the shafts of iron 800 hours.
3050*100*1.0 Knife blade . If you use a non-standard sizes knives that are not in our catalog, including high-strength), offer to make them in our production. This requires to provide a drawing, sketch or sample products. The material of the tool: HF. We invite wholesalers, which offer discounts. All knives produced at our factory.