Circulation pump Wilo Star-RS 25/4
| Price: | 940 UAH |
| Company: | OOO 'Kinavi' |
| Seller: |  Andrej |
| Phones: |  0675352813 Show phone |
| Address: | Ukraine, Poltavs'ka Oblast', Kremenchuk |
The circulation pumps are wet rotor and adjustable
performance designed for use in heating systems
closed and open type
Brief technical characteristics:
Head up to 4 m
Maximum ambient temperature 40
Tri-speed operation mode
Design characteristics:
The body of the pump chamber is made of cast iron
The impeller of the polymer
The stainless steel sleeve
Drive shaft made of stainless steel
The stator housing is made of cast iron
The pump bearings from metalographic
Performance monoblock
Engine:
Asynchronous operating at three speeds, single-phase wet rotor and the inner separating the stainless steel sleeve
Built-in capacitor
Class H winding insulation
Degree of protection IP44
Voltage single-phase 1 x 220 V / 50 Hz
Direction of rotation: counterclockwise (from the engine)
Limitations:
Pumped liquid: clean, non-aggressive and non-explosive, without solid or fibrous particles
Fluid temperature: from +10 ° C to +110 ° With
Maximum working pressure 10 bar
In order to avoid cavitation noise suction pressure should be at least 1.5 m of the water column at a water temperature of +90 ° With
The pump must be installed so that the engine was only in the horizontal position
The pump casing: cast Iron
Impeller: Technopolymer
Power pump: 0,065 KW
Pump flow: 2.8 m3/hour.
The pump head: 4 m
Liquid temperature: from +10 to +110°C
Country of origin: France
