Refrigeration equipment - cooling tower SMOA-20 "MINI"
Offer type: salePublished: 27.02.2015
| Price: | 8 000 UAH |
| Seller: |  Aleksandr |
| Phones: |  093-767-44-00 Show phone |
| Address: | Kyiv, Ukraine |
Designed for efficient cooling of the water in the circulating water supply systems-compressor stations, electric heating devices, refrigerators, air conditioning equipment, other equipment and technological processes in which heat must be removed by cooling water.
Main technical data
№ p/p Naimenovanie parameter SMOA-20 "MINI"
1 Allowable hydraulic loading m3/h
- minimum 12
- rated 16
- maximum 20
2 recommended water pressure in front of the tower, M. waters. senior 3 - 6
3 the temperature of water, °C 5 - 15
4 Heat load, mcal./hour not less than 80
5 Drip ash, not more than 0.01
6 Type spray nozzles Dek C1
7 the axial Fan In 06-300 N 8
8 motor Power (kW) 0.75 to 1.1
9 noise Level at a distance of 10 m, DBL not more than 70
10 overall dimensions ( length. • Shir. • high. ), mm 196012302140
11 Permissible temperature of the water entering the cooling tower, °C not more than 65
12 the Capacity of the receiving tank, m3 0,45
13 Pipe water supply ( Dу1 ), 65 mm
14 Overflow (Dу2), 20 mm
15 Drain pipe ( Dу3 ), 100 mm
16 Weight without water (kg) 385
17 Mass of water, kg 885
The heated water through the pipes of the water distribution system is supplied to the injector, which evenly distributes it over the surface of the fill; and then, passing from top to bottom, cooled transverse airflow generated by the fan and flows into the receiving tank.
Droplets of moisture that are carried by the flow of air, trapped by odological and also drain into the receiving tank.
Design features
Polymer fill provides intense cooling water at low aerodynamic resistance, not clogged, resistant to low temperature, service life up to 15 years.
The inner and outer metal surface of the tower is covered with a protective corrosion-resistant coating based on organic resins and natural oils with special additives. Due to its high fluidity and wetting ability of the tool displaces from the micropores of the material moisture and air and creates a film that protects the surface from electrolytic and sub pellicle corrosion.
Fan made for the area warm and moist air. Having a small weight and very low drip removal, cooling tower may be installed on the roofs of houses.
Main technical data
№ p/p Naimenovanie parameter SMOA-20 "MINI"
1 Allowable hydraulic loading m3/h
- minimum 12
- rated 16
- maximum 20
2 recommended water pressure in front of the tower, M. waters. senior 3 - 6
3 the temperature of water, °C 5 - 15
4 Heat load, mcal./hour not less than 80
5 Drip ash, not more than 0.01
6 Type spray nozzles Dek C1
7 the axial Fan In 06-300 N 8
8 motor Power (kW) 0.75 to 1.1
9 noise Level at a distance of 10 m, DBL not more than 70
10 overall dimensions ( length. • Shir. • high. ), mm 196012302140
11 Permissible temperature of the water entering the cooling tower, °C not more than 65
12 the Capacity of the receiving tank, m3 0,45
13 Pipe water supply ( Dу1 ), 65 mm
14 Overflow (Dу2), 20 mm
15 Drain pipe ( Dу3 ), 100 mm
16 Weight without water (kg) 385
17 Mass of water, kg 885
The heated water through the pipes of the water distribution system is supplied to the injector, which evenly distributes it over the surface of the fill; and then, passing from top to bottom, cooled transverse airflow generated by the fan and flows into the receiving tank.
Droplets of moisture that are carried by the flow of air, trapped by odological and also drain into the receiving tank.
Design features
Polymer fill provides intense cooling water at low aerodynamic resistance, not clogged, resistant to low temperature, service life up to 15 years.
The inner and outer metal surface of the tower is covered with a protective corrosion-resistant coating based on organic resins and natural oils with special additives. Due to its high fluidity and wetting ability of the tool displaces from the micropores of the material moisture and air and creates a film that protects the surface from electrolytic and sub pellicle corrosion.
Fan made for the area warm and moist air. Having a small weight and very low drip removal, cooling tower may be installed on the roofs of houses.
