Twin-shaft forced concrete mixer BP-2 G-4500 volume of 4500 l
Price: | negotiated |
Company: | Mashinostroitel'nyij zavod PAO 'Betonmash' |
Seller: | otdel sbyita |
Phones: | Write a message |
Address: | Ukraine, Donets'ka Oblast', Sloviansk |
Construction equipment - twin-Shaft forced concrete mixer BP-2 G-4500.
Twin-shaft concrete mixer BP-2 G-4500 is designed to produce
commercial concrete and large volumes of concrete for concrete products.
Volume ready 3000 HP
Twin-shaft concrete mixer BP-2 G-4500 is a stationary
drum with two shafts, which are located in a spiral
mixing blades, which ensures spiral
transportation of the mixture along the shaft and each shaft in the opposite
side. At the end of each shaft has mixing blades,
located in the opposite direction, to transfer the mixture to
the opposite shaft. Thus the mixture in the mixing tank
moves koltseobrazno and when driving helical turns
inside. This leads to intense movement of the mixture in three
the directions. To increase the share of the relative motion of the two circles
mixing cross in the middle rounds of mixing. There is
a high-turbulence zone, the reinforcing effect of mixing.
Due to the design of reinforced concrete body degree of homogenization
approximately 95%, is achieved for 30 seconds stirring at
a relatively low rotational speed of the mixing shaft (22 min-1). It
saves energy, reduces wear and provides gentle treatment for
of the mixture.
Unloading of twin-shaft concrete mixer is via rotary
the valve, located on the longitudinal side in the middle part of the body.
A large part of the concrete mixture is discharged under the action of gravity when
the damper is opened, the remainder is fed to the window unload mixing
the blades. Therefore, the probability of stratification of the mixture is very
small. Rotary damper allows dosed
opening and immediate closing without jamming.
The advantages of twin-shaft concrete mixer BP-2 G-4500 compared to machines of other types:
- most level, the mixing chamber is more compact
- with the same amount lower surface subject to wear
- possible re-start under load
- possibility of operation with underutilization
- it is possible to cool the mixture by the addition of ice or steam heating
- you can use placeholders sizes up to 180 mm
- ability to successfully mixed self-compacting concrete mix
Numerous advantages of twin-shaft concrete mixer testify
that he is the ideal machine for the production of concrete
the mixtures.
The amount of dry filler, l 4500
Volume ready, l 3000
While stirring, with 30...40
The mixer drive, kW h
The frequency of rotation of the shafts, min-1 22
Section of the inlet pipe of the pneumatic system, DN 25
Section of the inlet water pipeline, DN 200
Mixing blades, 16 PCs
Overall dimensions, mm
length 3827
width 2470
the height of 2085
The price is given.