Sell hydraulics, Pneumatics and machine parts warehousing

Sell hydraulics, Pneumatics and parts machining storage:

The oil pump plunger (M-06) at No. 8;

The shaft III to milling machine R in No. 4 pieces;

The tape perforator PL-150M in No. 14 pieces;

Clutch ETM 084-2A in No. 150 units;

Lathe Chuck 3 Kul. 7100-0007 (3-200.07.01 Ø 200 mm) No. 8;

The rotary table separating for milling machines f 320 in No. 2 pieces;

Videos thread rolling 40 compl. (the village. 54. M6 step 1,25 - 6 PCs; M6 step of 1.5 - 40 units; M8 - 2 pieces; M16 step 2 - 10 units; M27 step of 1.5 - 4 pieces; and the settlement of 63 M20 - 2 pieces);

The motor-reducer K4-UTP-200.12.500 (e. engine, AI 2M 80 A4 U3, 1380 rpm 0,55 kW.) in Nr. 5 pieces;

The valve hydraulic H-22 (20 l/min, DN 12 mm, PH 3.5-200 kgf/cm) Qty 24 pieces;

The valve hydraulic H-32 (32 l/min, DN 10 mm, PH 20 MPa) at No. 19 pieces;

The valve hydraulic H-33 (63 l/min, DN 16 mm, PH 20 MPa) in the amount of 2 pieces;

Pump hydraulic single-threaded G12-AM (50,8 l and 53 L.) in the amount of 50 pieces;

HerodRossel PG 77-14 in No. 18 pieces;

Choke with regulator PGM 55-24 (-16 DN mm 80 l/min) Qty 2 PCs;

Valve reverse PG 51-22 in No. 1 PCs;

The valve PG 51-24 (DN 20 mm, q - oil-80-160 l/min) Qty 1 piece;

The valve PG 55-24 in No. 2 pcs.;

The spool PBG 54-32 in No. 2 pcs.;

Choke regulator of G 55-13 in No. 30 pieces;

Choke G-21 in No. 17 pieces;

The Spool G-12 (R - 25 kgf/cm2, DN - 10 mm, q - oil-20 l/min) Qty 1 piece;

Valve hydraulic control MCGU-25/FC in No. 2 pcs.;

Pneumatocele P-DM 10-2 (Pnom - 1 MPa, DN - 10 mm, Ku - 1,80 m3/h) No. 4 pieces;

The valve P-RK 3,6 (Pnom - 1 MPa, DN 4 mm, Ku - 0,24 m3/h) in No. 12 pieces;

Pneumatic valve reducing CRP(M) V-16 Qty 2 PCs;

The lubricator 121-16 (B44-14) at No. 92 units;

The magnetic filter net 016 FMS MR (R - 6,3 kg/cm2 DN - 10mm, q - oil-32 l/min) Qty 2 PCs;

Filter magnetic mesh 008 FMS MR (R - 6,3 kg/cm2 DN - 10mm, q - oil-16 l/min) Qty 2 PCs;

The filter mesh linear grease 12-16 (GOST 6918) No. 5 pieces;

Pneumatic valve time delay V-21 (PH 6.3 kgf/cm2, Qн to 0.032 m2/min) in No. 2 pcs.;

Valve unloading CRM-32 (BG-15), (R - 200 kgf/cm2, DN - 32 mm, q-oil - 140 l/min) Qty 2 PCs;

Screw cross filing with bronze nut on the milling machine, screw length 650 mm in the No. 1 piece;

The variable-speed drives on drilling machines in No. 4 pieces;

Motor-drums TM 2,2-320*500-1,6 (Interroll, Germany) in the amount of 500 pieces with storage.

Offer their prices!!!