The fire pump MO-UV (new)
| Price: | 900 $ |
| Seller: |  Pashkevich Aleksandr |
| Phones: |  (097) 715-11-01 Show phone (099) 25-99-399 Show phone |
| Address: | Ukraine, Rivnens'ka Oblast', Sarny |
FIRE PUMPS
It is worth considering that the fire pumps are not self-suction and require filling before use. If the pump depends on fire tanks, it is only required to open the valves. In the case of the operation by open water - mandatory initial population. For these purposes a special vacuum device that sucks in the cavity of the fire pump water.
As soon as the pressure required to open the valve, so that the water entered the fire hoses. But fully ready fire hose will be only after receipt of the jet without air content. In the operating mode fire pump able to operate and throw water up to 7.5 m in height. Internal seal cavity of the pump that you want to check regularly with the help of vacuum, are also not the last value in the high-quality operation of this device.
If you want to apply a mixture of water and foam, the pump is equipped with phenomenial. In this case, the ingress of water and foaming agent occurs through special valves regulating the supply of foam and water mixture.
Characteristics of fire pumps SPC-40/100 and SPC-60/100MAIN TECHNICAL SPECIFICATIONS
SPC-60/100
SPC-40/100
Rated flow, m/s (l/s)
0,06 (60)
0,04 (40)
Head in nominal mode, m, not less
100
100
Power at rated speed kW (HP), not more than
100 (136)
65,3 (88,9)
Nominal shaft rotation frequency, Rev/min
2900
2700
Pump efficiency, %, not less
60
60
Permissible quotazioni stock, m, not more
3,0
3,0
Working pressure at the inlet to the pump, kgf/cm2
6
6
Working pressure at the outlet of the pump, kgf/cm2
15
15
The highest geometric suction height, m
7,5
7,5
Pump flow at the highest geometric suction and a nominal head, l/s, not less
30
20
Range of dosing proprioreceptive, %
6
6
Overall dimensions, mm
700/900/700
700/900/700
Full weight, kg
65
65
