KTP booth - complete transformer substation
Offer type: salePublished: 01.06.2014
| Seller: |  Gurvich Mark Vladlenovich |
| Phones: |  4922-305368; 8-903-6471471 Show phone |
| Address: | Russian Federation, Vladimirskaya Oblast', Vladimir |
KTP booth - complete transformer substation for outdoor installation
three-phase alternating current with frequency of 50 Hz, is a
electrical device used for the reception, conversion
, transmission and distribution of electrical energy.
Used in power networks:
industrial enterprises
rural and urban settlements
construction sites and other facilities
Transformer substation kiosk type come in two standard versions:
- dead-end
- throughs
The amount of power transformationin
Capacity of power transformers, Quat 25 to 2500
The voltage on the HV side, CW; 10
Switchgear high voltage RU HV - 6(10) kV: oborudovaniya-HH, CSR-2xx
Current thermal resistance on the HV side for 1s., CA
Rated peak withstand current on the HV side, CA
Performance Woosy, cable
The voltage on the low voltage side, kV,4/0,23
Switchgear low voltage RU NN - 6(10) kV: oborudovanie-70
Current thermal resistance on the low voltage side within 1C., CA
Rated peak withstand current at the low voltage side, CA
Performance Nostalgy, cable
Design
KTP Kiosk type is a modular pre-assembled welded metal structure. Blocks (modules) are made with a frame made of steel profiles with resistant coating for increased corrosion resistance and modern design. Modules lined with galvanized sheet thickness 1,5 mm
Blocks (modules) KTP Kiosk type usually are:
- switchgear high voltage high voltage switchgear-6(10) kV with cell type CSR
- Bay power transformer,
- switchgear low voltage low voltage switchgear-0,4 kV with the cell type THAT.
Layout KTP kiosk type, its dimensions and the number of blocks depends on the schema of the electrical connections, the number of cells and the capacity of the transformer. Blocks KTP kiosk type separated by metal partitions, and have separate doors, lockable locks.
For ventilation and cooling systems installed within a block of the apparatus doors have openings with shutters. In some cases, the camera of the transformer can be provided with an axial exhaust fan..
Kiosk type frame with insulators for overhead lines-0,4 kV.
The base CTS Kiosk type is monocoque design of the profiles, which has a solid or expanded metal flooring with malopriemlem hole for emergency release of oil from the transformer and holes for input and output cables. The strength of the base transformer module is designed for installation of one power transformers up to 2500 kVA.
High voltage switchgear at substation with a capacity of 250 kVA is performed on the basis of series cameras KCO-HH, and over 1,000 kVA can be made on the basis of CSR-2xx with vacuum circuit breakers.
Low voltage switchgear, with panels SHCHO-70 as with circuit breakers on the input and exhaust lines and breakers and fuses.
4922-305368 ;8-903-6471471
http://www.elektroshit.vlar.ru
three-phase alternating current with frequency of 50 Hz, is a
electrical device used for the reception, conversion
, transmission and distribution of electrical energy.
Used in power networks:
industrial enterprises
rural and urban settlements
construction sites and other facilities
Transformer substation kiosk type come in two standard versions:
- dead-end
- throughs
The amount of power transformationin
Capacity of power transformers, Quat 25 to 2500
The voltage on the HV side, CW; 10
Switchgear high voltage RU HV - 6(10) kV: oborudovaniya-HH, CSR-2xx
Current thermal resistance on the HV side for 1s., CA
Rated peak withstand current on the HV side, CA
Performance Woosy, cable
The voltage on the low voltage side, kV,4/0,23
Switchgear low voltage RU NN - 6(10) kV: oborudovanie-70
Current thermal resistance on the low voltage side within 1C., CA
Rated peak withstand current at the low voltage side, CA
Performance Nostalgy, cable
Design
KTP Kiosk type is a modular pre-assembled welded metal structure. Blocks (modules) are made with a frame made of steel profiles with resistant coating for increased corrosion resistance and modern design. Modules lined with galvanized sheet thickness 1,5 mm
Blocks (modules) KTP Kiosk type usually are:
- switchgear high voltage high voltage switchgear-6(10) kV with cell type CSR
- Bay power transformer,
- switchgear low voltage low voltage switchgear-0,4 kV with the cell type THAT.
Layout KTP kiosk type, its dimensions and the number of blocks depends on the schema of the electrical connections, the number of cells and the capacity of the transformer. Blocks KTP kiosk type separated by metal partitions, and have separate doors, lockable locks.
For ventilation and cooling systems installed within a block of the apparatus doors have openings with shutters. In some cases, the camera of the transformer can be provided with an axial exhaust fan..
Kiosk type frame with insulators for overhead lines-0,4 kV.
The base CTS Kiosk type is monocoque design of the profiles, which has a solid or expanded metal flooring with malopriemlem hole for emergency release of oil from the transformer and holes for input and output cables. The strength of the base transformer module is designed for installation of one power transformers up to 2500 kVA.
High voltage switchgear at substation with a capacity of 250 kVA is performed on the basis of series cameras KCO-HH, and over 1,000 kVA can be made on the basis of CSR-2xx with vacuum circuit breakers.
Low voltage switchgear, with panels SHCHO-70 as with circuit breakers on the input and exhaust lines and breakers and fuses.
4922-305368 ;8-903-6471471
http://www.elektroshit.vlar.ru
