Sheet L63, Sheet LS59-1 brass sheet in Poltava
Offer type: salePublished: 18.06.2015
| Price: | 88 UAH |
| Company: | UkrInterStal' OOO |
| Seller: |  Bodryij Oleg |
| Phones: |  Write a message |
| Address: | Ukraine, Poltavs'ka Oblast', Poltava |
099-204-34-26 097-581-91-97 063-541-18-84
One of the most popular alloy is an alloy of copper and zinc in brass. In addition to typical brass copper and zinc, can also add in an alloy of tin, Nickel, aluminum, cobalt and other metals to obtain special properties of their products, not available to ordinary brasses. Depending on the proportion of the alloying element (zinc) and impurities, and copper alloys of the group are divided into three groups: normal brass, leaded brass and special brass.
An example of applying partial planirovanie, having on one side excellent physical and electrical properties similar to copper, on the other hand - low cost, are widely used in many sectors of industry. The use of brass is even wider!
Most private brass are used for the production of high-quality contacts of electrical devices. Alloy brass is often used in the manufacture of contacts in telecommunications. Due to high quality products, brass strips tear-off You can make very complex contacts.
Less obvious, but equally important is the use of brass AERIS in the production of metal products, jewelry, watches and decorative details. Made of brass products attract attention thanks to a brilliant smooth surface of the highest quality. Moreover, the brass are easy to process (stamping, engraving, and milling) and are low price. If You need a relatively cheap material for enamelling, etching or the production of decorative metal products with excellent surface, You can trust us!
Most prevalent among clients in the CIS and Baltic States got brass brands AERIS 130 (instead of L68) and AERIS 138 (instead of L63).
These materials emit a great ability to cold and electrolytic processing, tinning and soldering with a soft solder. In addition, they are resistant to water, neutral and alkaline solutions, organic compounds, as well as terrestrial, marine and industrial atmosphere.
Brass alloys 130 and AERIS AERIS 138 are supplied as:
Standard coils with outside diameters up to 1400 mm;
Rolls with the welded ends with the weight of the drum to 1.5 tons;
Multicolou up to 5 tons;
Tapes with hot tinning;
Milled ribbons;
Sheets;
Tapes and sheets with protective film.
Available sizes brass tapes:
Tape thickness – 0.10 mm; finer sizes – custom made
Belt width from 3 mm, but not less than 10 thicknesses of tape
One of the most popular alloy is an alloy of copper and zinc in brass. In addition to typical brass copper and zinc, can also add in an alloy of tin, Nickel, aluminum, cobalt and other metals to obtain special properties of their products, not available to ordinary brasses. Depending on the proportion of the alloying element (zinc) and impurities, and copper alloys of the group are divided into three groups: normal brass, leaded brass and special brass.
An example of applying partial planirovanie, having on one side excellent physical and electrical properties similar to copper, on the other hand - low cost, are widely used in many sectors of industry. The use of brass is even wider!
Most private brass are used for the production of high-quality contacts of electrical devices. Alloy brass is often used in the manufacture of contacts in telecommunications. Due to high quality products, brass strips tear-off You can make very complex contacts.
Less obvious, but equally important is the use of brass AERIS in the production of metal products, jewelry, watches and decorative details. Made of brass products attract attention thanks to a brilliant smooth surface of the highest quality. Moreover, the brass are easy to process (stamping, engraving, and milling) and are low price. If You need a relatively cheap material for enamelling, etching or the production of decorative metal products with excellent surface, You can trust us!
Most prevalent among clients in the CIS and Baltic States got brass brands AERIS 130 (instead of L68) and AERIS 138 (instead of L63).
These materials emit a great ability to cold and electrolytic processing, tinning and soldering with a soft solder. In addition, they are resistant to water, neutral and alkaline solutions, organic compounds, as well as terrestrial, marine and industrial atmosphere.
Brass alloys 130 and AERIS AERIS 138 are supplied as:
Standard coils with outside diameters up to 1400 mm;
Rolls with the welded ends with the weight of the drum to 1.5 tons;
Multicolou up to 5 tons;
Tapes with hot tinning;
Milled ribbons;
Sheets;
Tapes and sheets with protective film.
Available sizes brass tapes:
Tape thickness – 0.10 mm; finer sizes – custom made
Belt width from 3 mm, but not less than 10 thicknesses of tape
