Automatic wood pellet hot water boiler Pelletstar 10-60 kW
Offer type: salePublished: 22.06.2015
| Price: | 1 800 EUR |
| Company: | 'TEHNOREVOLUTION' |
| Seller: |  Oleg |
| Phones: |  (067) 271-04-95 Show phone (095) 704-59-10 Show phone |
| Address: | Ukraine, Odessa oblast', Odesa |
Pelletstar 10-60 kW - automatic pellet boiler the new generation.
Manufacture: Austria.
Pelletstar is a compact automatic steel boiler, is used in individual heating systems for private houses and small objects of municipal and domestic use.
Fuel wood pellets.
Automatic torch cleaning from ash.
Available two front ashtray for ash.
Fully automated cleaning cycles of the chimney.
Heat-resistant combustion chamber.
Housing made of special steel sheets and checked for leaks.
Minor losses due to optimal heat insulating material.
Terminal control T-Control.
The exhaust fan.
Design description
Structurally, the boiler body is a candy bar in the middle of which is located the burner with the fuel systems and remove the ash, is also the three-pass fire-tube heat exchanger with the disposal of ash and flue gases. In the burner combustion takes place on the so called drop the grate, the fuel is fed into the grid from above, from below through the holes in the grate primary air is supplied through openings in the side walls of the burner secondary air. Ignition is automated, occurs by means of an electric element with a blower, the temperature in the burner is controlled and regulated by the automatic T-Control. The removal of sols from the boiler is automatic in a separate ashpit. From the burner, the ash is removed with movable grates, which falls and holes passes through the matrix, flicking the ash from the surface of the ashtray, which is located under the burner. Removal of ash from the heat exchanger occurs automatically during the operation of the boiler, this allows you to preserve a stable efficiency of 92% - 94% boiler range power modulation from 30% to 100%. Cycles and the cleaning systems may change.
When designing the heating system with the boiler pelletstar, the company HERZ Energietechnik, recommends the use of a buffer tank (tank puffers).
Job description
The coolant circulates through the system highly-efficient heat exchanger of the boiler, heats to the automation of the boiler (T-Control) temperature according to external temperature probe (supplied) and temperature conditions of the heating circuits (included, management for 1 heating circuit), the maximum boiler water temperature is 95 ° C, maximum system pressure of 3 bar. Fuel from the fuel storage is automatically fed through the screw conveyor (can be a combination of several transporters) to intermediate the airlock, which is located near the boiler. The airlock serves as a barrier between the fuel storage and boiler, represents the element of the protection system preventing occurrence of reverse effect ignition of the fuel. From lock chamber the fuel is fed automatically using the built-in screw conveyor into the chamber of the burner. The frequency of fuel delivery, the volume of primary air and secondary (which is regulated by an exhaust fan), cycles of operation of the boiler, change the modes of operation of the boiler during the day, display the status of the boiler and adjust its operating parameters is implemented and controlled using an electronic control system of T-Control, this allows the boiler to operate in fully automatic mode.
Description specification
The basic equipment of the boiler includes:
Remote control T-Control provides:
- the equitherm regulation for 1 (one) of the mixing circuit
- management of the tank
control of the heating of domestic hot water heater
- support temperature return line 60 OS
- automatic ignition
- lambda control
- automatic cleaning of the burner and heat exchanger ash removal in a separate ashpit
- quickly diagnose errors (error log)
- all temperature sensors are included in the scope of delivery!
In additional equipment may include:
To the remote control T-Control :
- the weather-dependent control modules, up to 6 (six) mixing circuits,
module control the operation of solar collectors.
Pelletstar is a compact automatic steel boiler, is used in individual heating systems for private houses and small objects of municipal and domestic use.
Fuel wood pellets.
Automatic torch cleaning from ash.
Available two front ashtray for ash.
Fully automated cleaning cycles of the chimney.
Heat-resistant combustion chamber.
Housing made of special steel sheets and checked for leaks.
Minor losses due to optimal heat insulating material.
Terminal control T-Control.
The exhaust fan.
Design description
Structurally, the boiler body is a candy bar in the middle of which is located the burner with the fuel systems and remove the ash, is also the three-pass fire-tube heat exchanger with the disposal of ash and flue gases. In the burner combustion takes place on the so called drop the grate, the fuel is fed into the grid from above, from below through the holes in the grate primary air is supplied through openings in the side walls of the burner secondary air. Ignition is automated, occurs by means of an electric element with a blower, the temperature in the burner is controlled and regulated by the automatic T-Control. The removal of sols from the boiler is automatic in a separate ashpit. From the burner, the ash is removed with movable grates, which falls and holes passes through the matrix, flicking the ash from the surface of the ashtray, which is located under the burner. Removal of ash from the heat exchanger occurs automatically during the operation of the boiler, this allows you to preserve a stable efficiency of 92% - 94% boiler range power modulation from 30% to 100%. Cycles and the cleaning systems may change.
When designing the heating system with the boiler pelletstar, the company HERZ Energietechnik, recommends the use of a buffer tank (tank puffers).
Job description
The coolant circulates through the system highly-efficient heat exchanger of the boiler, heats to the automation of the boiler (T-Control) temperature according to external temperature probe (supplied) and temperature conditions of the heating circuits (included, management for 1 heating circuit), the maximum boiler water temperature is 95 ° C, maximum system pressure of 3 bar. Fuel from the fuel storage is automatically fed through the screw conveyor (can be a combination of several transporters) to intermediate the airlock, which is located near the boiler. The airlock serves as a barrier between the fuel storage and boiler, represents the element of the protection system preventing occurrence of reverse effect ignition of the fuel. From lock chamber the fuel is fed automatically using the built-in screw conveyor into the chamber of the burner. The frequency of fuel delivery, the volume of primary air and secondary (which is regulated by an exhaust fan), cycles of operation of the boiler, change the modes of operation of the boiler during the day, display the status of the boiler and adjust its operating parameters is implemented and controlled using an electronic control system of T-Control, this allows the boiler to operate in fully automatic mode.
Description specification
The basic equipment of the boiler includes:
Remote control T-Control provides:
- the equitherm regulation for 1 (one) of the mixing circuit
- management of the tank
control of the heating of domestic hot water heater
- support temperature return line 60 OS
- automatic ignition
- lambda control
- automatic cleaning of the burner and heat exchanger ash removal in a separate ashpit
- quickly diagnose errors (error log)
- all temperature sensors are included in the scope of delivery!
In additional equipment may include:
To the remote control T-Control :
- the weather-dependent control modules, up to 6 (six) mixing circuits,
module control the operation of solar collectors.
Delivery and installation guarantee!
