sell shunt 75shsm 30-hamper
Offer type: salePublished: 29.06.2015
| Price: | 50 UAH |
| Seller: |  artur |
| Phones: |  0976877677 Show phone |
| Address: | Ukraine, Kharkivs'ka Oblast' |
sell shunts 75shsm ,20,30,50 amps,each position in the number!!
The shunt measuring stationary 75SHSM with a nominal voltage drop 75mv is designed to increase the measurement range indicating and recording instruments direct current (DC ammeters and counters Cove ampere-hours).
The shunt 75SHSM is the simplest measuring Converter current to voltage. The main characteristic of the shunt is its ultra-low resistance. For this purpose, the design of shunts used alloy manganin, which has a very low rate of thermopower in tandem with copper (no more than 1 mV/1 °C) and low electrical resistance. For example, the shunt 75SHSM 5A has a resistance mom, and the shunt 75SHSM 15000A – 7.5 ohms. The shunt 75SHSM made in the form of plates of manganin, soldered brazed to the ferrules of copper (which is used to remove heat from the manganin plates). The shunt has four clips, two of which input (bolts), they are supplied with current, and are called current. Two other clip – weekend (screws), they are relieved the tension, and are called potential.
The shunt measuring stationary 75SHSM with a nominal voltage drop 75mv is designed to increase the measurement range indicating and recording instruments direct current (DC ammeters and counters Cove ampere-hours).
The shunt 75SHSM is the simplest measuring Converter current to voltage. The main characteristic of the shunt is its ultra-low resistance. For this purpose, the design of shunts used alloy manganin, which has a very low rate of thermopower in tandem with copper (no more than 1 mV/1 °C) and low electrical resistance. For example, the shunt 75SHSM 5A has a resistance mom, and the shunt 75SHSM 15000A – 7.5 ohms. The shunt 75SHSM made in the form of plates of manganin, soldered brazed to the ferrules of copper (which is used to remove heat from the manganin plates). The shunt has four clips, two of which input (bolts), they are supplied with current, and are called current. Two other clip – weekend (screws), they are relieved the tension, and are called potential.
