Borehole and well pumps Pedrollo
Offer type: salePublished: 24.06.2016
| Price: | 1 000 UAH |
| Company: | ChP "GidroAvtomatizatsiya" |
| Seller: |  D'yachenko Bogdan Vasil'evich |
| Phones: |  067-233-04-64 Show phone |
| Address: | Ukraine, Kirovohrads'ka Oblast', Kirovohrad |
4SR Borehole 4-inch pumps
Pumps of this series are recommended for pumping clean water containing not more than 150 g/m3 of sand. Due to the high efficiency and reliability, these pumps are used in everyday life, in utilities, in industry, for automatic water supply together with the automatic units maintain the pressure for irrigation, for washing equipment, to increase pressure and fire safety systems, etc.
Case material:stainless steel; Flow rate up to 375 l/min (22,5 cu. m/h); Head up 405м. The maximum fluid temperature +35 °C; supply Voltage 230-380 V AC, 50/60 Hz; cable Length: 1.5 m.
4BLOCK Borehole-piece 4-inch pumps
Borehole close-coupled electric pumps built in stainless steel ready to install.
Includes:
capacitor and thermal protection built-in inside the engine
– the power supply cable is 20 meters long.
Pumps of this series are recommended for pumping clean water from wells containing not more than 150 g/m3 of sand
Due to the high efficiency and reliability, these pumps are suitable for use in the home, to automatically feed water, in conjunction with the automatic units maintain the pressure for irrigation, etc.
Case material:stainless steel; Flow rate up to 375 l/min (22,5 cu. m/h); Head up 405м. The maximum fluid temperature +35 °C; supply Voltage 230-380 V AC, 50/60 Hz; cable Length: 1.5 m.
6SR submersible 6 inch pump
Pumps of this series are suitable for pumping clean water with sand content of not more than 100 g/cubic meter High performance and reliability allow successful use of these pumps in the household and communal sectors, as well as in industry for supplying water to automatic water-lifting stations and washing equipment for irrigation, fire fighting, etc.
Borehole pumps ø 4" . The motor casing material: Stainless steel ; Head up to 390 m; Flow up to 1000 l/min (60 m3/h); Voltage: 380 V; 50 Hz; Maximum temperature of liquid: +35 °C; cable Length: 1.5 m
NK submersible pump for well
Pit submersible pumps NK is designed for lifting water from wells, ponds and other sources, for pumping water from tanks. The pumps are equipped with float switches, automatically disconnecting them when the water level to drop below the set, and including - when reaching a specified. The sump pump, in contrast to the borehole are less sensitive to verdadeira particles contained in the water. Most often, they have a lower fence hole, so it can work in partial immersion. Pumps of this series are suitable for pumping from wells and wells of clean water with a sand content of not more than 50 g/cu m. Depth of application до20м.
The motor casing material: Stainless steel ; Pressure up to 105 m; Flow up to 120 l/min (7,2 m3/h); Voltage:220 - 380 V, 50 Hz ; Maximum temperature of liquid: +35 °C ; cable Length: 20 m
