MPS Calpeda - Submersible multistage pumps for clean water
Offer type: salePublished: 24.06.2016
| Price: | 1 000 UAH |
| Company: | ChP 'GidroAvtomatizatsiya' |
| Seller: |  D'yachenko Bogdan Vasil'evich |
| Phones: |  067-233-04-64 Show phone |
| Address: | Ukraine, Kirovohrads'ka Oblast', Kirovohrad |
Design.
Monoblue submersible multistage pumps. Outer casing in stainless steel AISI 304. Stage isotable of Narila. MPSM with built-in capacitor, accessible through the casing in-feed part. The hydraulic portion of the bottom and top of the engine are cooled by the pumped water to ensure reliable operation even with partially submerged pump. Double shaft seal in oil chamber for reliable engine protection against water and for protection against dry running. Filter on suction prevents the ingress of solid bodies of diameter greater than 2 mm.
Application.
Water supply from wells, tubs or tanks. Use in the home, industry, horticulture and irrigation. Recycling rain water.
Operating limitations.
Maximum temperature of liquid: 35°C. Minimum internal diameter of well: 140 mm. immersion Depth: min 100 mm, max. 20 m (with cable of appropriate length).
Motor.
Induction 2-pole motor, 50 Hz, 2900 rpm./mins MPS : three-phase 230 V (10%); three-phase 400 V (10%). Cable length: 15 m, type H07RN8-F. MPSM : single-phase 230 V (10%) with heat protection device. Built-in capacitor. Pump with float switch MPSM. CG (on-demand) Cable length: 15 m, type H07RN8-F with plug CEI-UNEL 47166. Insulation class "F". Protection IP 68 (for continuous operation in submerged position). Winding dry with double impregnation, resistant to moisture. Execution in accordance with standard EN 60335-2-41 (CEI 61-69).
Special designs to order.
other voltages
frequency 60 Hz
cable length 20 m
the engine is predisposed to work with the inverter
