The drive of the planetary type "a" Tulaelectroprivod

The drive of the planetary type "A" - 01
One of the main areas of application of electric – water supply and heating. Gate valve used in the pump, pumping stations, recycling system of waste water and transporting drinking water, heating systems, heat exchangers heating mains, etc.
When installing on workstations, you receive the possibility of maintaining a stable the volume of water flow, control of the valves. Common modification gate valve – wedge.
Actuators of the type - And multi-turn
Working principle:
In the body of the actuator mounted planetary gear consisting of brake gear, eccentric shaft, satellites and dvuhventsovye drive gear, which is fixed on the output shaft.
Node differential clutch consists of a shaft, a worm preloaded with two sides with springs and nuts. Supports the shaft cover are attached to body.
At one end of the shaft includes a handwheel for manual motor control.
The worm is connected with a brace with the sector gear, which in gear turns the platen. On the shaft mounted torque Cams. The impact of the Cams on the microswitches is carried out through intermediate levers.
Installation torque microswitches in starting position is accomplished by interlocking Cams, which are mounted on the shaft and have him frictional connection.
Node limit switches consists of a gear mounted on the output shaft, gears, worm, worm wheel which is fixedly mounted on the shaft. On the shaft mounted Cams, which affect the buttons of the limit microswitches. The roller passes rotation clockwise of the mechanical position indicator and gear, which through gear influences resistor sensor.

In stock - 1pc.