Complex for measuring the pressure IPDC 89012

The purpose of the system for measuring pressure IPDC 89012. IPDC is an exemplary tool and is designed for calibration of pressure instruments. The device is intended for use in conditions normalized for climatic performance UHL 4.2* or О42* according to GOST 15150-69, but at an ambient temperature of (23 ± 5) °C and relative humidity of 80 %. If you change the ambient temperature for every 1 °C within the above range of temperature (23 ± 2) °C change in the readings should not exceed 0,0025 % of its upper limit. The device is intended for operation in explosion-proof areas. The device is single-function, multi-band, restoring product. The device is designed for pressure measurement in following units: MPa or kgf/cm2. The device should not be connected to electric networks of residential houses.
Technical data of the complex to measure the pressure IPDC 89012.
The basic error is expressed in percent of the measuring range, 0.06% in
The upper limit of measurement - 100kPa (1Kgs/sm 2)
The range of measurements taken the difference between the upper and lower limits of measurement. The variation of the readings does not exceed the absolute value of the maximum permissible basic error.
The instrument has two calibration points: the lower and upper are the same for all measurement ranges of the instance IPDC. The calibration point for the pressure measurement in kPa (kgf/m2) or MPa (kgf/cm2) is indicated in the passport of the device. Calibration points are checked and adjusted when reported by the working chamber with the atmosphere when performing work calibration. The device is powered by AC voltage (220 22/-33) V and frequency (50 ± 1)Hz. Power consumption of the device no more than 30 VA. Materials parts in contact with the medium — alloy 36NICRTIAL and steel 12KH18N10T. MTBF of the unit is not less than 5000 hours. The average shelf life is 6 months before putting the unit into operation. Average recovery time operating state of the device no more than 36 h The medium for IPDC with the upper measurement range up to 2.5 MPa (25 kgf/cm2) inclusive — gas. Full average life to write off at least 10 years. Unit weight not more than 13 kg. Completeness of the complex to measure the pressure IPDC 89012. 1. The system (device) for measuring pressure digital IPDC - 1 PC. 2. Insert fuse ВПТ6-2B - 2. 3. Passport 3.9060.715-01 PS - 1 copy. 4. Technical description and operating instructions 3.9026.288-01 - 1 PC. 5. Outlet ШР16П2НШ5 - 1 PC. IPDC is an exemplary measuring device pressure readings which are displayed on the digital display of the voltmeter Щ1516 (not included)

In stock - 1pc.