Injection pump VD N999 - repair of concrete structures
| Price: | 20 300 UAH |
| Company: | OOO "Agregatremservis" |
| Seller: |  Ivanov Aleksandr Vital'evich |
| Phones: |  380662222202 Show phone |
| Address: | Ukraine, Kharkivs'ka Oblast', Kharkiv |
Universal injection pump it is used to stop and eliminate further damage to concrete structures, walls, floors, ceilings in the formation of cracks, voids and eliminate the active water seepage in any cimentoacademy and stone surfaces ... reactive smoly Pustule, microemulsions and aqueous solutions are injected under controlled high pressure into hard to reach areas of the repaired surfaces, which leads to andx fast and high quality waterproofing, stop active leaks, removal of dry and wet cracks, and sealing working joints, filling voids
For good is a relatively new NICHE IN the CONSTRUCTION BUSINESS, and your additional source of income
The pump is powered by an electric drill that comes in the kit. Drill adjust the speed and therefore the pressure of material from 0 to 400 bar. The chemical material is supplied under high pressure, into cracks or holes using packers, which previously enshrined in the repaired surface in close proximity to voids that must be filled in.
Equipment
piston pump
- pressure gauge;
- high pressure hose 4.5 m;
- feed hopper;
- an electric drill;
- a set of tools and spare parts.
Specifications:
- weight: 8 kg;
- maximum working pressure: 0 - 400 bar;
- capacity: up to 1 l/min;
supply voltage: 220V;
- hopper capacity: 2 l;
- nozzle for injection of high pressure collet;
- power (pump drive-electric): 560 .
The effect of chemical resin
Method of stopping leaks and restore the structural integrity of concrete with the resin was developed almost fifty years ago, a chemical resin is the oldest and best method to prevent for example the groundwater in structurally reliable sewer system. A chemical reagent is injected through leaking joints, cracks, faults and voids in the side vents and other areas. The most common entry points for seepage of groundwater are hatches in the joints and connections of the supply lines.
Resin of polyurethane is often used in non-structural water abstraction / repair of inflow. Experts are implementing a polyurethane solution in actively leaking cracks and voids using mechanical packers that are installed by drilling a structure, the insertion of the packer and tighten. Then, the polyurethane solution is injected under high pressure.
In these applications typically used two types of polyurethane solutions: hydrophobic and hydrophilic. The hydrophobic solution repels water and has a high expansion and rigidity gets in contact with water. The hydrophilic gel absorbs water, has lower extension and utverjdaet flexible foam. Both styles require that active cracks in water activation.
PU resin has found wide application in the repair of concrete and other structures. Epoxy injection is a bonding process. The material fills cracks and weld them constructively. Epoxy mortars also pushed through the crack under high pressure, and the resulting bond is stronger than the substrate itself.
Repair with injection resin PUR restores the structural strength in the cracked concrete with voids, softening of concrete deposits. Epoxy injection can also be used to prevent corrosion of reinforced steel and fill the voids in the unconsolidated concrete
Specialists and USA and Europe in this area have long used the experience of applying chemical solution to thousands of direct crack of cracks in different types of structures to stop inflow and infiltration of water, to restore structural integrity and provide the necessary repair of the crumbling concrete.
