Technical MBS 10mm
Offer type: salePublished: 07.04.2021
| Company: | Silver, OOO |
| Seller: |  firma Silver |
| Phones: |  (0362)68-04-69 Show phone |
| Address: | Rivnens'ka Oblast', Rivne, Ukraine |
Technical MBS 10mm is the oil-petrol-resistant technical medium hardness, which is the manufacture of parts (gaskets, floorings, gaskets), operated in aggressive environment. Standard: GOST 7338-90.
Technical MBS is supplied in rolls of a width of 1200mm, as well as in the insert size 1000х1000мм.
Working environment rubber plates MBS 10 mm: air of premises, capacities, vessels; inert gases at pressure from 0.05 to 0.4 MPa or oil and fuel oil-based, gasoline at pressure from 0,05 to 10 MPa; nitrogen. MBS (average): 50-65 hardness shore A; -30°C to +80°C.
The use of rubber plates MBS 10 mm
MBS technical-C is used for the manufacture of various rubber products used to seal demountable and fixed joints in machinery, reducing friction loads between the surfaces, for damping of shock loads, as well as decking. Details of this material are mainly used in mechanisms with the availability of petrol, oil, nitrogen environment, inert gases, oil products etc.
Technical MBS is supplied in rolls of a width of 1200mm, as well as in the insert size 1000х1000мм.
Working environment rubber plates MBS 10 mm: air of premises, capacities, vessels; inert gases at pressure from 0.05 to 0.4 MPa or oil and fuel oil-based, gasoline at pressure from 0,05 to 10 MPa; nitrogen. MBS (average): 50-65 hardness shore A; -30°C to +80°C.
The use of rubber plates MBS 10 mm
MBS technical-C is used for the manufacture of various rubber products used to seal demountable and fixed joints in machinery, reducing friction loads between the surfaces, for damping of shock loads, as well as decking. Details of this material are mainly used in mechanisms with the availability of petrol, oil, nitrogen environment, inert gases, oil products etc.
