Drilling-filler machine maggi boring system 323 in very good condition.

Drilling-filler machine Maggi Boring System 323 is designed for drilling holes for accessories in face and edge of the furniture pieces.

This model has three drill heads (one horizontal and two - vertical) to 23 spindles each with a center a distance of 32 mm and quick-release collets. Cross travel vertical boring groups with electronic sensors starting from the zero point, is carried out on the bearings by prismatic guides. The convenient control panel control with adjustable feed rates, order of filing and off for each drilling unit on the right of the upper machine frame.

Design and mount on a horizontal plane creating maximum stability and accuracy when working.

Turning from 0° to 90° vertical drill head with pneumatic locking system in any intermediate position.

Pneumatic the clamps can be rotated from 0° to 90° with wooden panel 750х106х30 designed for reliable fixation of the workpiece of any size and provides hand protection of the machine operator during operation.

 The positioning of the workpiece happens at the aluminum ruler, with a length of 3000 mm, with 4 ( two left and two right) mobile pneumatic stops

Installation drilling depth - the patented SPIRAL SYSTEM for horizontal drilling drills standard lengths 57,5-70-77-85-105 mm, which meets all of the necessary types of operations, enabling instantly, easily and efficiently set the depth of drilling in the following steps:

   * select the type of drill bit;

   * selection of the desired drilling depth on scale;

   * the spiral twist of setting transparent the indexed element to the desired depth;

   * lock the spiral with the handle.

technical settings

Center distance of spindles 32 mm

The number pneumatic hold-down clamps 2 PCs

The number clamping collets 15 piece

Maximum lifting height of the clamp from the table, 85 mm

Maximum piece dimensions 80 x 850 x 3000

Working air pressure 6 - 8 bar

Air flow on working cycle 12 l

Weight 1100 kg

Overall dimensions 1600 x 950 x 1400 mm

Vertical the drilling head

The number the vertical drill heads, 2 PCs

The number the spindle of each drill head 23 PCs

Distance between first and last spindle on each drilling unit 704 mm

Min. the distance between the parallel vertical boring heads 150 mm

Max. the vertical distance between parallel boring heads 850mm

Maximum drilling depth 80 mm

Table height 890 mm

The number motors per group 1 piece

Power motor 1.5 kW

Frequency the spindle rotation 2800rpm

Horizontal drilling head

The number the vertical drill heads 1 PCs

The number the spindle of each drill head 23 PCs

Distance between first and last spindle on each drilling unit 704 mm Maximum drilling depth 80 mm

The number motors per group 1 piece

Power motor 1.5 kW

Frequency the spindle rotation 2800rpm